Jump to content

last call: parting 1988 Jeep Comanche SWB ... 11735 NY


Recommended Posts

Parting and then hauling to the crusher. no part to small, let me know what you need, i would like to save as much of this truck as possible.


all parts from 1988 Jeep Comanche 4.0L auto 4x4 ... all prices or best offer unless noted as firm; all prices + shipping or local pick up


http://rides.webshots.com/album/5785811 ... host=rides


Body parts: I will cut parts off of the cab to use as patch panels, let me know what you need.

cab corners - $100 each

roof with pillars - $200 each

Bed (swb) - $300 ( i will cut panels if if needed)

Tail gate - sale pending

frame rails -- i will cut if needed.

- if someone wants the stripped chassis and cab for a project, please let me know ASAP i have clear title for it



- bucket seat brackets driver and passenger side - $125

- passenger bucket seat $100

- plastic panels that go behind the seat and up the pillar - $50/all

- the rest of the interior is pretty nasty, but if you can use something, let me know


Drive train:

- running 4.0L, $100 <-- you remove, add $100 if you need me to take it out

- driving automatic trans with transfer case $100 <-- you remove, add $100 if you need me to take it out

- d44 rear axle w/ drive shaft -- SOLD

- front axle $75


Miscellaneous -- all best offer

- electric fan

- various computers, modules, switches, etc...let me know what you need, send an offer.

- emblems

- fuel sender

Link to comment
Share on other sites

Webshots was down so I couldn't see the type of rear window.


Slider - definitely. fixed glass - sure, is it worth the effort? Don't know.


At least pull the gasket like this viewtopic.php?f=9&t=19487 if it is rubber.


The gasket is one of those MJ specific parts that are hard to come by.



Thanks for the info...its a slider and I will definatly save it

Link to comment
Share on other sites


This topic is now archived and is closed to further replies.

  • Create New...