Jump to content

Recommended Posts

Posted

my opinion

Jensen: crap

Sony: makes OK sound

pioneer: depending on the series is better then the Sony's

eclipse: pretty good sound, more focused on the highs and mids

Kicker: also very good, little better then the eclipse, also focuses on highs and mids

Polk: very nice all around speaker, nice highs, mids and lows **Favorites**

Alpine: right around the same as Polk's (at least the type R's and up) **also Favorite**

 

these are mostly speakers you can get in big box stores (best buy, Circuit city before they were run into the ground).

I have also heard good things about JL, Infinity. and don't buy anything from Dual, Boss, or anything from walmart.

they have a pretty good 5.25 selection here: http://www.onlinecarstereo.com/CarAudio ... wAll=True&

and the 4x6 are here: http://www.onlinecarstereo.com/CarAudio ... wAll=True&

 

that is where I plan to buy my new components from for my car, I just have to figure out what ones to get.

Posted

I had Jensens in my F100. I agree, they were crap.

 

Pioneer used to have a bad rap back in the 80s, but a friend has a pair of 6x9s in his Monte Carlo and they sound pretty good.

Posted

Just went through this myself and after listening to a lot of different speakers, I chose the Infinitys in the stock size and location. I believe music should sound crisp and clean, not loud and deafning. I've got the 5 1/4 kappa series in the door and the 4 x 6 reference series in the b-pillars. Sound oh so good with just the stock radio and the pioneer 12 disc changer. :thumbsup:

 

:cheers:

Posted

One more vote fpr the Infinity Kappas. :thumbsup: Very nice sound from my 5.25 components with separate tweets fed with 75 watts rms. Speakers buried behind your butt are overrated in my opinion and I eventually dumped the added 6x9s (in little boxes) for the single 8" woofer (getting 150 rms).

But if you aren't adding in external amps, even the cheap Walmart no-names are waaaaay better than 20 year old factory speakers. :D

Posted

are you joking guys i am running KENWOOD all the way there affordable dependable and most of all they are freaken hard as hell to blow. i love them ..... i got kenwood head unit, 5 inch rounds, 6x4s , 6x9s , a kenwood 2000 watt mono amp, and a 1200 watt slim sub behind the seat . its like a back rubb while driving. KENWOOD ALL THE WAY jamminz.gif

Posted

i've had several pioneers, including 5.25's, 6.5's, and 6x9's (can't recall the model numbers at the moment), and i've always found them to be pretty good for the money. i have a set of infinity's that will be going in soon...if i can just decide if they go in my DD, or my truck...

Posted
Just went through this myself and after listening to a lot of different speakers, I chose the Infinitys in the stock size and location. I believe music should sound crisp and clean, not loud and deafning. I've got the 5 1/4 kappa series in the door and the 4 x 6 reference series in the b-pillars. Sound oh so good with just the stock radio and the pioneer 12 disc changer. :thumbsup:

 

:cheers:

 

Did you need to cut the door panels to make them fit?

Posted

I went with the components and mounted the tweeters right above them. I had to cut a hole in the steel, but it worked out great. the splitter box is tucked up to the left of the drivers feet.

 

Posted
I went with the components and mounted the tweeters right above them. I had to cut a hole in the steel, but it worked out great. the splitter box is tucked up to the left of the drivers feet.

 

Yeah how'd you get it to stay there,, the cup holder???

Posted

GREAT CHOICE!!!! INFINITY ALL THE WAY!!! Kappas are a great line, referance are good also, bottom line is stay with INFINITY.

 

I have too had many brands, some better then others. Some really god while others only OK, Infinitys ALWAYS GREAT!!! More expensive yes, but speakers is NO PLACE TO SKIMP!!!

 

CW

Posted
I went with the components and mounted the tweeters right above them. I had to cut a hole in the steel, but it worked out great. the splitter box is tucked up to the left of the drivers feet.

 

Yeah how'd you get it to stay there,, the cup holder???

 

 

A small screw through the blank plate area. :thumbsup:

Posted
Did you need to cut the door panels to make them fit?

 

 

The ones I used were the two ways with the tweeter on top of the woofer. They fit just fine but with the door panel on, the speaker grill just barely touched the tweeter. I modified the grill to give a little extra room but keep the stock look. I did a write up in the DIY section. Click Here

 

I attached the crossover to the wiring harness in the door with a ziptie to get it up about mid door level.

 

:cheers:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...