awhpoo Posted April 19, 2009 Author Posted April 19, 2009 its a 35 ill get a better one today you can also tell its a 35 because of the gusset since they like to bend part of the reason i got them for free bent housings ;)
Casper2000 Posted April 21, 2009 Posted April 21, 2009 Thanks for the link on the bumpers. I'm thinking about getting on of the other ones they offer
awhpoo Posted May 14, 2009 Author Posted May 14, 2009 well we got the junk yard mj about ready for driving we don't normally like lifted 2wds but its just temporarily 2wd. I couldn't wait to see how it looked with some of the extra parts we got laying around.
freakjeep93 Posted May 15, 2009 Posted May 15, 2009 :agree: nice job and rerally nic mj ... thats gunna be almost exactly waht I'm gunna do with mine
Nate C Posted May 18, 2009 Posted May 18, 2009 Very nice, that MJ is looking real good already. Cool bumper kit  Can't wait to see more of this build up.
zjrog Posted June 1, 2009 Posted June 1, 2009 The way I see it, you got another MJ as a solution for extra tires and wheels... I wonder if that would work with my wife...
awhpoo Posted June 8, 2009 Author Posted June 8, 2009 well i got a bit of work done this weekend. Â what it started out lookin like. Â to a rather quick. Â taking the plastics off to get to the carpet. Â and after we got the carpet out i was suprised at what we found. the worst bit of rust in it. other then that it looked really good. and after a bit of sanding and a shot of flat black till we primer it. Â getting it ready for the cage to go in and then going to start to install the 97 dash and seats.
awhpoo Posted June 30, 2009 Author Posted June 30, 2009 been pretty busy striping the mj all down and getting it ready to go back with the 97 stuff got a ton of pics I'm working with atm they are on the way. :cheers:
awhpoo Posted July 1, 2009 Author Posted July 1, 2009 well finally got the engine all together here's a few of the process had to dig out the valve machine During after Doing the seats on the head putting springs back on and together and then back on the block got the valve cover back on i have put it completely together ready to drop it in when the time comes just didn't get any pictures of it.  Got the old 4 cylinder out and the tiny transmission took the pressure washer to the engine bay also got the back half cleaned off  got the grinder out and took a bit to dig more in the rust spot and found from the bottom not to bad i have seen worse looking at others pictures here. Got the fiberglass out and patched it right up. thats about where we are at right now can't wait untill this 3 day weekend to get some primering and other stuff done. Thanks for lookin! :brows:
awhpoo Posted July 17, 2009 Author Posted July 17, 2009 i got a quick question what are some of you guys doing for rear leafs?? I don't really like add a leafs was going to go with the stocks soa with a ubolt elim kit. Just curious on what u guys are running or if you have found any places that sell like spring.
dakineJ Posted July 17, 2009 Posted July 17, 2009 i got a quick question what are some of you guys doing for rear leafs?? I don't really like add a leafs was going to go with the stocks soa with a ubolt elim kit. Just curious on what u guys are running or if you have found any places that sell like spring. Benz Spring in Portland.Or. can make a set,takes 2 days I think and their price seems good.For lift springs,I was thinking Hellscreek.I want suspension travel so I,m staying SUA w/a lift shackle and 3" pack probably. Good progress on the truck :thumbsup: . I,m jealous, looks like you have access to good equipment. Look forward to more. :cheers:
awhpoo Posted July 18, 2009 Author Posted July 18, 2009 Thank you. Got part of the roll cage in today hoping to get some of that mocked up but will be mostly checking out the front air locker in our Cherokee, it sprung an air leak, its not good when airs coming out the vent tube right??? lol.
awhpoo Posted February 8, 2010 Author Posted February 8, 2010 Got quite a bit done in the last few months since i have updated. It is now running no check engine light on no codes came up purs like it was never wrecked. Â
awhpoo Posted March 13, 2010 Author Posted March 13, 2010 Got my y link upgrade all set up to go so here the pics. :cheers: Â
Dirteatr717 Posted March 13, 2010 Posted March 13, 2010 nice buildup! can't wait to see everything all together! My dad did the same thing with a datsun rearend and made a trailer :thumbsup: :cheers:
neohic Posted March 13, 2010 Posted March 13, 2010 Cool! Any need to remove the old lower control arm mounts?
awhpoo Posted March 14, 2010 Author Posted March 14, 2010 yea we removed just the inside half of the lca mounts so far but will remove the entire mount and clean it up.
Unglar Posted March 14, 2010 Posted March 14, 2010 Wow, that looks awesome! Can't wait to see wheelin pics! :popcorn:
Backroads Posted March 14, 2010 Posted March 14, 2010 :cheers: Awesome progress! My brother runs the treks Y link....top quality stuff!
awhpoo Posted July 15, 2010 Author Posted July 15, 2010 first run out with it its pretty much done other then paint bumpers rock rails and some trimming :waving: Â Â
87Chief Posted July 16, 2010 Posted July 16, 2010 May have missed this, but what size lift and all that are you running? Â Looks great!!
awhpoo Posted July 17, 2010 Author Posted July 17, 2010 7.5" rubicon express coils 2" pucks and just sprung over in the rear it sits a lil bit high in the front at the moment but i havent put my revolver shackles on yet.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now