BLHTAZ

Yep...all shirts are screen printed and the hats will be embroidered.

That would actually act the other way. Higher vacuum at idle, lower at higher RPM's :hmm: OK...I'm intrigued. Are you saying that there is stronger vacuum at idle than there is at say 2500 RPM? :dunno:

I like this one myself...

Yea...ya know...me too. That's why I had to post it :thumbsup:

I don't blame you for not wanting to be part of NAXJA...I wouldn't either. It's kinda like Pirate...some good info, but a rather arrogant bunch of over-inflated egos in general from the limited experiences I have had over there. They only treat most folks half way decent if they "pay" to be part of the site. RC should be good from what I have heard about them, but no personal experience. :thumbsup:

That's what I thought I remembered too, but I am just a parts guy so I was not sure ;)

Wade...do me a favor and lay one of your 5T shirts out and measure it across the chest armpit to armpit and then down the front from the top of the neckline to the bottom of the shirt. I want to compare them to the XS youth that I have here and let you know. I can get them that way too...just thought that the multi-color hats would be more popular. Prices will be the same...just be specific in your order email about it being a solid khaki hat and if you want structured or not.

To get something that cheap they would have to be used as they are going to be junk if they are new ;) . Remember...you get what you pay for :thumbsup:

That's what I was thinking too. If the pump is old, the blades can actually be rotting away and not able to move enough water at idle... :dunno: The only other thought I had was that there is a minimal vacuum leak somewhere that is only showing effects at low RPM right now.

NICE!!! This makes me hungry...just thinking of that tail with some BBQ sauce cookin' on the grill :drool:

Yea...that's one of those little things that they use to make up for what they loose on doing tons of warranty work all day :yes: . 10 minutes worth of work... $40 - $50 ... they like it (as I know from being there).

Sorry to hear of the extra moeny spent, but glad to hear that it is going again :thumbsup:

That programming may have to be done at the dealership, but there is usually instructions in the owners manual on how to program them yourself. Look it up and give it a try...worst case is you have to go to the dealer and pay the $40 - $50 programming fee that most charge :shake:

Check with Tom at Hell Creek Suspension. He is a member here wit huser name ' HellCreek ' . I hae their 3.5" springs and love them. They do have 4.5" springs as well and I think their price is comparable...especially if he gives you a little CC member deal ;) . No guarantees on the "deal" part, but Tom is good people and it's cool to keep it in the family if we can.

Unfortunately...we found out on the first round of ordering that the warehouse I get the shirts from no longer carries Tall sizes. Some of the t-shirts are available in 4X & 5X sizes, but the colors are limited to the common stuff...White, Black, Ash Gray, Sport Gray. Most all of the colors are available in sizes up to 3X. One of the more popular colors sold in the first round was Olive and that is available up to 4X t-shirt. Order them up guys & gals. I am going to try not to drag this out as long as the last time, but we still need to get the minimum # of shirts ordered to even make an order. This was no problem the first round and I am sure it will not be this time either. Shirt minimum order is 24 Hat minimum order is 25

We could do tank tops, but then you are looking at added expense as the artwork would have to be changed for them because what goes on the t-shirts won't work on a tank because of structure & placement. It has been our experience in the t-shirt business for over 5 years now that tanks just do not sell well in general. The only ones we have had good sales from are ladies tanks, but men just don't go for them much.

That's why I said this earlier...just didn't sound to me like the resistor was the issue for sure, but anything is possible.

Got this in an email today... ----------------------------------------------------------------------------------------------------------------------------------- 'Twas the night before the Super Bowl, when along the gulf shore, Steelers fans were praying for "just one more." The players were nestled all snug in the sack, With visions of the first NFL Six-Pack. Coach Tomlin was young, but wise for his years, So I drifted off to sleep without any fears. When at the stadium there arose some strange chatter, The Cardinals feared, what was the matter? We heard "Okel Dokel", we heard "Double Yoi," We jumped from our beds, our hearts jumped for joy. He stood at the fifty with a grin ear to ear, Steelers fans everywhere started to cheer. Then in an instant to our surprise, This little old man had tears in his eyes. He went to the booth and there took his chair, While Terrible Towels waved in the air. Then over the airwaves came his shrill voice, The Steelers Nation began to rejoice. He said, "I am back, but you know I can't stay, I just had to see my Steelers play. From my home up above, I have a great view, But I wanted to celebrate here with you. So bring on the Birds, we'll send them a flyin', On the way back to Phoenix, they will be cryin'. Ben, Hines, Troy, Jeff and all of the rest, No matter the outcome, to me you're the best." The airwaves went silent, the stadium still, Was this just a dream, it seemed so real. In our team we have faith, In our team we have hope, But the game's not the same without Myron Cope. --------------------------------------------------------------------------------------------------------------------------------

Well...I can't really say what I am thinking on here without getting in trouble so suffice it to say... :shake: idiots :shake:

:hmm: That's a question I can say never came to my mind and I have never heard before... I always just tighten them down good & snug and leave it at that. Never had an issue.

Yes...that is the blower resistor :thumbsup: Yea...that picture is pretty bad, but at least yours didn't fall apart like mine when I removed it. All of hte coils on mine had rusted so bad that when removed, they just fell in about 500 pieces all over my floor.

This is a LONG post. Please read all of it slowly and carefully so you don't have to ask questions that are likely already answered here :cheers: The shirts can be had in many different colors, but the printing will be done in either Dark Green or Tan only (your choice). Please choose the color shirt that you feel will be appropriate with either of those colors printed on it. Please understand that not all colors shown will always be available and be prepared with a second choice in color if I have to contact you about it. The cut off date for ordering will be February 15th We'll start off with pricing on the items being offered. Shirts Short Sleeve T-Shirts = $15.00 Long Sleeve T-shirts = $19.00 Hooded Sweat Shirts = $23.00 Zippered Hooded Sweat Shirts = $27.00 >>Black or Gray only<< (not pictured) Youth & Toddler sizes are available in short sleeve t-shirts only and will be the same price as the adult sizes. See below for details on colors. Here are the color charts for the items we are offering. Click on the charts to go to a detail page for each one... Image Not Found Image Not Found You may click on the two color charts below to get a more detailed look at the colors as well as the specific color name for submitting your order Image Not Found Image Not Found The Hoodies will be offered in these two options only... Image Not Found Image Not Found Some other samples for your viewing pleasure... Image Not Found Image Not Found These are the two style choices for the hats... They are both adjustable hats so that one size fits most. Please email me at - mjjeeper @ yahoo.com (remove spaces) - with the following details to place an order: -Your first & last name -Your forum screen name -shipping address -phone number -What style shirt/shirts that you want including size, shirt color & print color -For hats...which style (structured or non), how many and color combo I will get back to you with a total owed including shipping ASAP as well as the PayPal address to send your payment. Payment must be made in advance! The cut off date for ordering will be February 16th, but we MUST have no less than 24 shirts ordered for anything to happen at all. All pictures shown are mock-ups for reference only. The real shirts will look similar to them, but may differ in color somewhat. We REALLY prefer that PayPal be used for payment. A PayPal account is not required as it allows you to pay with a Debit or Credit card if you wish. We will accept a Money Order as the ONLY other form of payment. All needed payment information will be in my response email with your order total. Shirts are being brought to you by;

I am willing to help you out, but you may want to see if one of the many members that are more in your area will jump in here for you so we don't have to deal with shipping them to me in FL and shipping again all the way up to you ;) .

Well...I thought I had added myself on there a long time ago, but I guess not. I'm on there now too :cheers:

The engine is the only concern as the tach will be the problem. I have been told, and have seen on here, that the calibration of the tach from a 4.0L to the 2.5L 9or vice versa) is not terribly difficult if you get the right cluster to be calibrated, but it would be a lot less headache to just get the right one and not have to worry about it.