speeding_infraction

Yep, I came to the same conclusion. Not sure how that would effect my issue tho.

Think we could make this a sticky? Very helpful for reference.

What are the bolt specs for the very bottom bolt of the ax15 belhousing?

Ok so I changed out the diff cover gasket and when bolting the diff cover back on I must've not installed the load sensing brake adjustment set up, and it doesn't skid anymore🤷🏼‍♂️ guess that fixed it.

I looked again and didn't see anything.

I looked and didn't see any lettering but I checked the other twowires and they both read zero.

I will check.

Also, replaced the O2 sensor. The old one was completely black when I took it out. It seems to run a little smoother now, not sure if that's my imagination though.

My throttle body measures 60mm. The TPS doesn't have letters on it, so I tested the middle wire and it read about 50.6/7 ohms. The value changed 0.1ohms when I shook the harness next to the valve cover.

Saw the second one in a week the other night.

Was thinking about doing this on my old Cherokee, never pursued it. Curious to see what other people have done

Got it fixed nevermind

My current cable is 39" and the replacement is stated to be 45"

Working on tip number 1, I found this: Obviously it will need replaced. I looked up the part on Napa online and the replacement has an extra small cable on it which mine doesn't. Is it still okay to use? https://www.napaonline.com/en/p/MPB781107

Just yesterday saw a black one with chrome trim in white center, Seattle WA. If you see this, nice truck! Looked clean. First one I've seen besides my own in about 6 months🥲

AMC: America's Major Catastrophe Just Empty Every Penny Garbage Manufacturing Company

Unless you are talking about the lug nuts, then you want 3/4 or 13/16

Grab a cheap socket set, then you won't have to run to the store everytime you need a socket. IIRC, it's a 9/16 or 5/8 socket. Metric 14 or 15 mm

I guess check valve lash and if you have a feeler gauge check the clearance between the valve and the rod and compare it to the others. Also check clearance between piston and cylinder wall and make sure your piston ring gaps are correct.

K I'll check em out

There's a vacuum gauge on my dash, is that what your asking? At idle it reads between 15-20

Not sure what you mean about the MAP sensor. Whats the difference between renix and HO throttle bodies? Also don't know about the tps. Never changed it.

I am putting this in my diffs and using lubelocker style gaskets. Make sure the gasket surfaces are clean https://www.amazon.com/gp/aw/d/B000IG5QPK?ref=ppx_pt2_mob_b_prod_image

My truck has 165k miles on it. Will start on the tips tomorrow.