JOMJ87

Thinks ill hit them up when i get a chance. We are working our butts off this week on Base so it maybe next week. Cole

Mine is also the pressed cardboard stuff but i was thinking this would be easy to manipulate into the right shape and also be pretty thick and last a good while. Think the peg board would be hard to get to bend correctly without braking it. Cole

Ok i got my hands on some free fiberglass 5x15 ft roll and resin so here is the plan... I will lay down the old board and cover it in the fiberglass and lay the resin to it allow to dry and then romove the fiberglass piece and clean it up a little and cover it with foam and fabric and it should be good to go. How does everyone think it sounds???I will post up if it works and then everyone else will have a idea to try if they want to. Thanks for all of the input on this topic it has been very helpful. Cole

So i finally Painted the MJ.. It was not looking so swell and there were alot of small rust spots so i decided to brake out the sander and the rattle cans and got to it. After 3 hours of prep and 45min of painting it turned out like this....... Thers a couple of bad spots but it looks alot better than it did since it was 3 different shades of primer grey and the orginal paint. Now i just got to touch up the spots that need it. Then i can finish the interior. Cole

I was wandering if anyone knows where i can get the JEEP decals for the tail gate mine were destroyed so i am wanting some new ones. I was in a hurry and didnt search for a topic but if there is one post it up or i will get around to searching later. Cole

Empty Post

Junk Yard or see if someone may have extras laying around. you could also check the dealer but they will prob be alot of dough from them. Cole

Thanks. Cole

I looked but didnt see...Wher did you order it i think i might try it i seen the part # but not the place. I may have looked over it. :oops: Cole

Those pics would be great. I have also been thinking of using foam to cover the roof then attach the fabric to that. So many ideas i just need to decide which i will do. PS what did you do to the front and back where the plastic don't cover the fabric??? Cole

The bad thing about the inserts are that they are usally plastic or fiberglass and the hood is metal. The problem with this is the metal expands different from the cowl causing any type of bondo or whatever you use to cover the screws and edge to crack. If you don't use anything to kinda make it look like it belongs ( like body compound) it looks really BAD. That is my experiece with them someone else may have had better luck. Cole

Do yall think that design would work for a tube door latch if mounted in the right place. Cole

Just a small Threadjack: I have one more question, would the TPS cause my MJ to run Rich. I am thinking it might be one of my problems but i was unsure exactly if it would cause the truck to run rich. Cole

I might try the fiberglass patch idea and see what comes of it. It can't make it any worse. ;) ill post up if it works so others will know. Cole

Your prob one of the biggest posters on the forum and you don't know how to post them...Just kidding....I really can't believe that....can we get pics of your head trama to i just want to see what a drag link will do cause i think ive covered everything else on the vehicle but that.lol Cole

No prob i don't know when it will be but my jeepin partner (I think JPN4LO is his name is on USJeeps) is deploying so it will be after he leaves in a month or two probaly. And i got to try to get an ATV for my other neigbor who is towing me cause his is for racing. I will be sure to let you know though and we can meet up. That also goes for anyone else who might want to go also..... Cole

Its always good to keep a camera handy at all times. I even has one that stays in the MJ for emergency photot opartunitys. :brows:

Click this tag before you post the pic and click it again after to get it to work you can find it in the upper left hand corner below the subject line. Cole

Can You email it If so i would like to see it. I'm trying to decide if i want to go to UNF or Gulches??? I have heard that UNF isnt worth the drive but i don't know. Have you been to UNF??? if so which would you choose. Cole

i was just thinking again and yes it was scary but i realized that i overlooked one thing.......The %@*# roof is sloped different at the back but i think i might try it and see if i can fanagle it in to place and hopefully it will still look alright. :brows: Cole

Ok i didnt know where to put this but i think it belongs here but Pete feel free to move it. This is a new ORV park that has opened up in upstate SC. I have been thinking of going but i don't have a tow rig. :cry: But Ive done some sweet talking to a buddy with an atv and we might split gas and he will tow the MJ with his ATV on it. Anyways from what ive seen it seems like a decent place.I know Jeepmj_tj knows about it so he may have been but i do know that its privately owned and seems to be getting better each week. Here is a link to the website for it http://www.gulchesorvpark.com/

I didnt even think of that but i did think of this what if i was to take the front half of a XJ headliner and cut it to fit????What does everyone think. I knoe the cab forward is the same and i have a parts XJ. Let me kow your thoughts on this. Cole

:jump: :rotfl2: :laughin: :yes: Its all in good fun. Cole

I thought that was a camper shell??? :dunno: Cole

I was wandering if there is anywhere i can aquire a headliner or even just the hardboard. I just took mine out and its broken into 3 pieces and is only held together by the Fabric (where it still is stuck up). Anyhelp is appreciated. Cole