drase

Will tailgate screws for a Jeep Cherokee fit our Commanche? I called Team Cherokee and they did not really know. They said they did not think so, but were not really sure. http://www.teamcherokee.com/Tailgate_an ... index.html Tailgate Hinge Screw Set OEM Cherokee 1984-1999. Does anyone know of place I can buy 2 tailgate screws? I stripped them getting them out.

God I wish I read this read 2 days ago. I stripped both the pass side bolts on the bottom and side of tailgate trying to remove it. One is still stuck halfway out. The drv side came off fine. FYI the bolts require Torx 40 screw. FML :doh:

I love unique vehicles. Every since I got my TJ, I looked at other Jeeps and noticed the MJ and how cheap they are to buy. After 3 months of daily searching on CL I found mine with no rust. I love the attention I get when I drive it, its almost like a Ferrari! Everyone gives me thumbs up or wants to buy it from me. I'll never sell it. And the best thing is my wife loves it too!.

http://tampa.craigslist.org/pnl/cto/2776946211.html

OMG, what a head turner. The front bumper, fender flares, rails, and qtr panel flares all flow so good.

http://cgi.ebay.com/ebaymotors/1988-Jee ... 4ab071c544

http://cgi.ebay.com/ebaymotors/AEV-Brut ... 2eb8b95670

http://lakeland.craigslist.org/cto/2627590847.html

NICE truck! Love that roll bar. All u need now is white stars on the doors and it could be poster truck for CC!

Fantastic MJ. I had your cardomain site bookmarked and this was one of the trucks that motivated me to get an MJ.

Heath Ledger has one in Monster's Ball.

Yep, saw it too.

Looks awesome! Love the interior.

WOW, that thing is a beast! Looks bad ace. Great job. :clapping:

http://lakeland.craigslist.org/pts/2344677388.html

Ordered 2 sets for all 4 wheels, god I hope this works! :???:

Thanx bro. I'm thinking about buying these today http://www.quadratec.com/products/92807_001.htm 1 more question, should I buy spacers for all 4 wheels or just front 2?

NewfieMJ, Thanks for the pics and quick response. I think it is the rims. I have read that spacers cause more stress on the axles, would having these spacers cause me to have to change the bearings more or any other adverse (aka more maintenance) effects?

Same problem, not going to take back to tire shop as got underneath and measured again and driverside is 5' 8/16 from frame and pass side is 5' 10/16 from frame. Its just 1/16th off and I do not see how they could get it exactly. Pass front tire still rubs on sway bar link. I don't know what to do. I think spacers might be the best answer as even if I get longer sway bar links I think the tire would still rub. Any suggestions?

Looks great! :cheers:

http://orlando.craigslist.org/cto/2327625738.html

Can't really tell. There's no photos of the bumpers on a XJ/MJ... Just because it looks good sitting on concrete doesn't mean it'll look good once all bolted up. What are you talking about? Look on XJ bumper and he has pics of it on the vehicle.

Thanks for the posts guys. Now I'm really confused. MJCARENA advises to put washers behind steering stops. Where would I get washers and what exactly are the steering stops? hornbrod advises to get longer sway bar links. Wouldn't longer links mess with geometry of the lift as a whole? The kit didn't come with longer links so I'm wondering if I'll run into more problems. NewfieMJ advises to put wheel spacers on. I might take back to tire shop to get track bar adjusted exactly right then go from there.

Here is his ebay store. The front bumper looks great! http://stores.ebay.com/Ares-Fab

Here is front pass tire turned all the way to the left and as you can see the inner tire is rubbing on sway bar link. Here's where the tire has rubbed on the sway bar link. Close up shot. CORRECTION: The tires are 31x10.5 BFG AT's. And yes, I got the Rusty's adjustable trackbar and the truck has been aligned and it drives completely straight. I was assured by Rusty's that 31x10.5s would not rub. When I called them about this problem they also suggested I just bend the original trackbar!??