87Chief

I'm still trying to figure this out.. The plastic vacuum hose won't fit into the front hole... Will probably break... And the back hole. The big hose on the manche is too small for the hole on the valve cover. What should I do? Is there any kind of hose that I can replace the vacuum hose with? That's flexible? And for the other hose, from the airbox. Is there a replacement for that too? Thanks.

For tools, go to craigslist. Or a pawn shop... Great deals.

That 44 looks like it is leaking a bit.. I don't know what or where from though... Might have a problem with it?? Not sure. I would be careful.

^how did you mount it? Well how are you going to? I want to do something like this also... Want to give me some measurements? :) thanks

Thanks for the responds so far guys. My friend has Bfg all terrains that I might put on... Don't know if they will rub or not

For a set of 31x10.5x15's on a stock suspension and rims would I need to get wj lower control arms? And wheel spacers? My friend has a set that he might get rid of soon and for some cheap tires I would do it

Ok, this is the valve cover that is on... The big hole in the back is where the vacuum goes? And the small hole in the front (next pic) is where I need to put the hose from the airbox?

See, I put a 91 YJ valve cover on, and I was testing to see if it would leak or not... It doesn't ( :thumbsup: ) but now i'm trying to figure out what I do the hoses, I'm not sure what the big one is for either, the hose itself is in rough shape, but the plastic vacuum hose I'm talking about is pretty big but too small to fit into the YJ valve cover... The Yj valve cover has a hole in the back too big for the hose that was on the front of the Comanch's VC, and vise versa.... What should I do?

I took the vacuum hose off from back of my valve cover... I plugged it with my finger, my engine doesn't shake as much. Like it runs better... Is it a good thing?

I was wondering where yall put your power and ground wires for your cv radio that you mounted in the center of the dash (near shifter)

My grandma lives there. She lives in downtown Chattanooga... I think. She likes it and I do too when I go and visit. She lives kinda out in the country so I find stuff to do. My uncles house is for sale up there it's on godsey lane. Has about 14 acres with mountain property.

About an hour and a half away from me, I might call tomorrow to see if they have anything..

No I do not have a toolbox but hopefully I will soon

Would it be this? http://www.truckers-store.com/store-pro ... 55308.html

I am wanting to mount my antenna right behind the cab on the drivers or passenger side on the truck bed. Not all the way at the bumper... Anyone have a good mount idea? Thanks

Well I just looked it over again, and there is a small hole on the front on the side, and then a decent size hole in the back.

No one?

I got a 1995 wrangler 2.5 valve cover to put on my Comanche. How can I do the CCV/PCV conversion? I only see 1 hole on the top for the valve cover... Thanks

Did the LED dome light upgrade about 2 days ago.. I love how bright they are now. I haven't been really busy on this due to work and stuff around the house, but my valve cover came in (from a 94 or 95 wrangler) and will hopefully been hooking that up some how...

Pete that top pic isn't mine lol. I'll post some pics soon. I'm at work right now.

Figured it out! Thanks guys! Turns out, had a blown fuse... Lol Question. The original fuses in the truck now are a bit bigger than the ones I have... I have ones for my Tj which are a little smaller... Where can I get the big ones again?

Ok. If I hook it up. Will it work the same? And what if it doesn't work?

Mine is different I only have two wires for the LEDs... Can I just splice them together? I tried just touching each one together... Nothing when I cut the wires.. The other dome light shut off and it won't turn back on with doors open.. Anyone have a diagram of what that wire actually is/does?

Awesome. Thanks.

Hmm. I'm doing the led dome light conversion in the diy section... He only put two wires in... I don't know how to put just two wires in when there are 3 wires... I don't have a striped wire on my led light pad...