jvd

It sounds like the turn signal has been left on, just a little louder. Tick about every 4 seconds when moving up to about 40mph then just about every 2 seconds when faster. Thanks for ideas to check out, hope to be able to troubleshoot it next week. Got to change the fuel pump in the 04 grand cherokee first.

Yep, referring to the 91 and that is disappointing news, thanks for the replies.

Driving to work (now) suddenly hear a ticking coming from instrument panel. Slows down as speed slows and increases in speed with speed, stops when I stop. My guess is speedometer cable loose? It's not jumping around or anything and haven't had the dash apart. Did a quick search and paradisemj mentions loose cable but his tick went away as he drove faster. Just curious if anyone had similar, not going to be able to look into it till next week anyway.

This was my last issue and there is nothing more than that pic on the cover in the mag, disappointing.

Literally live just outside west philly, any given day you can see half dozen to a dozen 4wheelers, dirt bikes or mini bikes on side walks, roads, even weaving between cars moving on street. Never see any pulled over, they even pull into gas stations to fill up. I do see many of them roll into the ER as traumas from stupidity. I call it job security, can't fix stupid.

I bought them last February with the first group buy and paid 370 with shipping. I only saved the confirmation email so I don't know the part #. Call and talk to Joe tell him what you want and he'll hook you up

I also just had an 8.8 installed (SUA) using the ruff stuff u bolt eliminator kit don't know if that would make a difference, shouldn't. I was surprised when the guy who installed it told me and when I first saw it. Before the rear was really low compared to the front and now it's just a couple inches higher. I really don't think I can get away with 3" coils without making the back (look) lower again, thus installing adjustable shackles or Chevy drop brackets. All I want is 3 inches of lift and then will trim and bump stop accordingly to fit tires. When I bought the packs and talked with Joe at GS he said to expect 2-4 inches of lift, guess I got 2 inch springs. Oh and even with new shocks they are really soft, the flex is amazing

Just got my packs from general springs installed and only got about 2 inch of lift with them. I have a hardly noticeable rake with my original coils up front, a bit disappointed. Nothing chevy drop shackle can't fix, I guess.

Ok, I have an internal slave ax15 in my 91 4.0. Trying to gather info for a clutch fix, going to be needed not to far in the future. This will be my first time changing a clutch. With having to pull the transmission to change the clutch, curious about just changing the transmission Now for the choices: I have a NV3550 with bell housing out of a TJ (inherited from brother in law). Should I just put the 3550 in (I would need to get a slave cylinder for it). In reading reviews it seems more people try to find a 3550 for the housing to use on an internal 15. Should I take the bell housing off the 3550 and put it on my ax15, thus creating an external slave ax15? I would have to purchase all other parts to change my ax15 from internal to external? Last choice, just pull the internal slave ax15, change the clutch and reinstall? In reading peoples experiences with internal slave transmissions, I feel that this option is polishing a turd! Sorry if this would be obvious to some of you, but experiences, advice, thoughts would be helpful Thanks Josh

Thanks, makes sense. Figure I will replace entire bench seat foam. Now to just do some more searchin and find quality foam

Cover is intact. I didn't realize there is foam and padding, I guess the foam is just worn out (I sink down in the seat). Would like to get quality stuff that will last.

Did a quick CC and google search but didn't come up with any great answers. Has anyone repadded their bench seat? Mine has seen better days and wondered if there were any recommendations? Thanks

In reading through several forums it seems team cherokee has changed ownership and people are getting ripped off by them, buyer beware.

Got my spidertrax spacers off their website, (blemished though I can't tell for 80$).

That was sir simons truck, I bought his jrc sliders when he got the bed tubed, sold it to somebody a couple years ago

Found my detours front bumper on craigslist for half the price of new. Guy bought his jeep with it already on and wanted to dump it. They are out there.

I'm pretty sure mnkyboy makes all if this own stuff, search around the forum a couple members build stuff to sell for the rear of the mj.

Don't know if this will work, but the link below is for a three page discussion over on naxja on Lokka lockers. http://www.naxja.org/forum/showthread.php?t=1102709&highlight=lokka

http://philadelphia.craigslist.org/pts/4186167447.html Reply dht54-4186167447@sale.craigslist.org [?] flag [?] : miscategorized prohibited spam best of Posted: 15 days ago Cap for SB Jeep Comanche - $450 (Bristol) © craigslist - Map data © OpenStreetMap I have a cap for a shortbed Comanche for sale. Red in color, high top version in very good condition. Sold the Jeep with tonneau cover so this is available. Cap's to fit a Comanche are hard to find. If you would like a pic please respond with your email address. Emails with offers will be ignored, offers in person with cash in hand are the only ones I will consider. If your reading this ad the cap is still available. Will consider trades for Jeep Scrambler parts.. please email what your offering. Location: Bristol it's NOT ok to contact this poster with services or other commercial interests

Figured there is always interest on here for plows http://delaware.craigslist.org/pts/4154896796.html Reply pq3x6-4154896796@sale.craigslist.org [?] flag [?] : miscategorized prohibited spam best of Posted: 27 days ago Meyers Snow Plow - $350 (New Castle) I have a good used Meyers hydraulic snow plow. It came off a Jeep 2A and was used to plow a driveway before I got it. I never mounted it to my jeep. What you see is what you get. I do not have the joystick for it. I have the mounting frame for a Jeep 2A. The plow measures 6' 6". If the ad is up it's still for sale. Thank you for looking... text or call 302-981-2690

Thanks for the input I appreciate it. After thinkin about it for a day, just seems to good to be true and I don't know enough to trouble shoot it I anything was wrong before purchase.

Looking at a used millermatic 211, anything I should keep my eye out for when I go look at it. Took welding at vocational school 15 + yrs ago but not since. Want to get back at it. 500$ cheaper than a new one comes with plugs and regulator. Thoughts

Rocky road outfitters misspelled comanche in some of their ads, come on man!

GLWS

Wish you didn't live on the other side of the country