Jackrabbit41

Well haven't worked on the jeep in forever and finally had a really productive day on it. I put a $#!& ton of dirt in it awhile ago and since then it was making horrible noises. Turned out it was just a bad u joint. I also re painted my bumper and rock sliders. And I painted over the rough country steering stabilizer cus I hate rough country and it's the only RC I have on my truck lol. Sent from my iPhone using Tapatalk

You mean "adjust the caster." Don't go cutting anything. Caster is adjusted on the MJ by adding or removing shims in the pocket where the back end of the lower control arms attach to the chassis. If there are no shims to remove on the left, you can add a shim or two on the right. I have adjustable lowers. Having those is it not ok to adjust caster by changing the length?

Ya thanks guys, my plan is to rotate the tires cus I really need to and if that doesn't work maybe shorten my left lower control arm a tiny bit and see if that effects the pull

So I got my second alinement in 6 months today and my truck still pulls decently to the right. I need to rotate my tires because my passenger side tire is worn very unevenly due to me needing an alinement for 2 years and neglecting to get one lol. I just feel like after going to 2 different reputable shops it should be better. I have iron rock off-road otk steering. No death wobble and my trucks not a $#!& box. Ya I need to rotate my tires but do these numbers look right to y'all? Sent from my iPhone using Tapatalk

So I'd love to get some updates doors for my manche. Can I put in powered doors without doin an entire 97 front clip swap?

I tried using a HO fly wheel in a 87 renix and it did not work. Cps doesn't work

The new daily Sent from my iPhone using Tapatalk

Haven't done a lot on the jeep lately other then get this Cummins comanche sticker. I need to fix a few things on it but I'm picking up a 12 valve Cummins tomorrow morning!! I'll have 2 trucks haha!!! Sent from my iPhone using Tapatalk

Look at my build thread. I have nates 4x4 sliders. They mount to the frame and pinch seam

I've really been wanting a dirt bike but I'm saving my money for a 95 dodge 12 valve (keeping the comanche)but my dad surprised me with this kx250 for my 18th birthday . We got a really good deal and it is so much fun Sent from my iPhone using Tapatalk

Mine took me 30 mins to install with no problems. Love it so much!

This is gonna be dope

31 spline Ford 8.8 with 4.10s and a LIMITED SLIP

What are the details on that gorgeous sidecar? BMW? My uncle bought it on the way up to drop off the trailer. Don't really know much about it but he's putting it on his Honda shadow

We never get snow here in Bellingham but today we've gotten 8 inches. At my high school there was an 8 foot pile of snow I tried ovdrice through. Ended up getting stuck and had to use the winch. My fairlead roller broke I've also had to pull out 3 people now. I'm amazed at how well my jeep does in the snow Sent from my iPhone using Tapatalk

Pretty icy around my area so got to pull out a few people. One of my friends hit a curb and bent his control arms on his subi so I had to drag him home Sent from my iPhone using Tapatalk

Check out my build. My Macco job is pretty good. Cost me 1100$

I have a hurst T handle on a Hurst short throw shifter

7

It's probably really easy but how do I install a trailer plug? I got a trailer and need to wire up my truck.

I was giving this trialer yesterday. Tandem axle tilt deck. 20ft by 8ft deck. My grandpa built it years ago. I'm going to paint it black and put my logo on it. I'm going to use my dads Silverado to pull it most of the time but the comanche might try to pull it too. I also got this vise and gave it a nice paint job with my new spray gun Sent from my iPhone using Tapatalk

a camera friend did that for me. I usually don't care but he's good with photoshop and did that hhaa

ya I hope it has trailer brakes ahhaa

the bumper mounts are the mates 4x4 diy kit which are 1/4 plasma cutted steel and I tied them into 1 inch thick flat stock that's also the shackle mounts

So i am being given a 20ft light duty tilt deck trailer that my grandpa built years ago. I'm wondering about towing it with my truck. Obviously I wouldn't be towin cars with it, I'll used my dads Silverado for heavy loads but what's a safe weight to tow with my truck? Also, my homemade bumper is very high so I will need a big drop hitch, any recommendations? I have a 4.0, ax15, 4wd, ford 8.8. My bumper is very strong but only mounted to the frame using 6 grade 8 bolts that go into the stock bumper holes that are threaded. What I'll be hauling mostly is steel from the scrap yard and car parts. The trailer overall is 24ft long.i have no pictures of the trailer but here's two of my bumper and how high off the ground it is: Sent from my iPhone using Tapatalk