mjeff87

:yes: :yes: :yes:

A Pittsburgh Christmas Carol: Yinz better wahtch aht Yinz better not paht Yinz better not cry, I’m tellin yinz hauscome Santa Clause is commin’ dahntahn He’s makin’ a list He’s checkin’ it aht He’s gowen find aht who’s nebby an at Santa Clause is commin’ dahntahn He knows if yinzes a jaggoff He can see inside your haus He knows if you’ve been workin’ hard Or sittin’ on your caach Yinz better wahtch aht Yinz better not paht Yinz better not cry, I’m tellin yinz hauscome Santa Clause is commin’ dahntahn..... What is frightening is that this is perfectly understood by those of us that have grown to love the Burgh. Merry Christmas

God's Country....make sure you grab a wagon when you go in. It's a fairly decent walk back to the entrance to grab one if you find you need one. Jeff

yeah, but it's all principal Brent....we just simply CANNOT loose to the Browns. Doesn't matter how we play ;) Jeff

nothing right in Richmond, but there's wheeling farther out west of here..Shoe Creek, Oak Ridge, Crozet, etc. Jerry and I might be doing a small run next weekend or the one after, let's try to put something together :thumbsup:

I'm currently up in PA for the holiday, leaving back for VA tomorrow morning. Might get it on tomorrow afternoon depending on when we get home. If not, I'll do it on Thursday, and post up the results. Jeff

mine are on schedule for delivery today, at the family house up in PA. I won't get to see them until tomorrow night :drool: Jeff

if it's a pain don't worry about it....MJ's show up here in my yards every once in awhile :cheers:

Pete, Did it still have the fuel pump/sending unit assembly in it, and if yes, was it in decent condition? I could use a spare.... Jeff

twist and pull the diapragm thingy....the shaft is attached to the inside of it. It will pull the shaft from the housing. Jeff

where are you in Chesterfield? I'm down in Chester, off Happy Hill Road. Tjbliley (Jerry) is up in Richmond.....we need a meet and greet. Jeff

yeah, different part numbers +/- 1996 per the parts place. I'll pick up the different one in the morning. Just spent the last 2 hours leafblowing....time for din-din and some brew... Thanky! Jeff

270, and I495 (inner and outer loop) around DC is a disaster, no two ways around it. I avoid them at all costs....sorry you found out the hard way. If you ever have to travel that way again, hit me backchannel...there's a couple alternatives depending on where you're going. Merry Christmas! Jeff

I got the brand new *cough* 'spensive FelPro gasket when I did the rebuild. Not sure on the part #, but it is the molded blue rubber one with the metal reinforcements around the bolt holes... edit: this one... Image Not Found

Don (or anyone), is there any reason a later model VC wouldn’t work on the Renix head? I picked up this one at the ‘yard today off a ’97….it’s practically brand new. I’m gonna try to fit it up tomorrow and see what happens. If it doesn’t work, I’m only out $3 :D Jeff Image Not Found Notice, there are no towers inside…..there’s a baffle that runs across the top. That oughta stop any oil from getting sucked out (I hope, anyway….) Image Not Found

yer a bit late Don.....I'm into my 7th Bud Light already, left work @ 1615 hrs. (It's been a long week.....) Cheers :cheers: Jeff

asked of the man with the chrome winshield washer resivoir cap :yes: ;) Jeff

either spacers or two different sets of aftermarket wheels with different offsets....I hate the width difference myself as well. Stoopid, I say.... Jeff

I had two weldnuts that were stripped on mine. I ended up drilling straight thru the other side of the framerail and adding a longer bolt with a fender washer and nut on the other side. Had to use a right angle drill because the rear quaterpanels are too close to use a regular drill. Jeff

I won't say that my gauge is anywhere near accurate, but at least it gives me a general idea of how much is in the tank :yes: Mine's not a DD anymore, and I pretty much drive it by the odometer (fill it around 125-150 miles or so). Jeff

That's what I'm doing....I'm running an HO pump assembly from a longbed in my Renix. Just gotta remember that "empty" = full tank, and visa versa ;) Jeff

Thanks Pat. As usual, I'll bring the beer, and I still have that box of rods for you from when we did the perches. My wife just bought me a set of DB's for Christmas....but she doesn't know it yet :banana: $156 and change with shipping. Jeff

no link, just found out at a local club gathering last weekend (MPJAI). Give Pat a shout, he knows the guy.......

no, that would be plug and play :cheers:

Image Not Found