BREEZE1 Posted August 4, 2008 Share Posted August 4, 2008 I'm looking for a nice front bumper for my Comanche. Something that is high clearance and doesn’t weigh a ton. I was wanting to start a thread were people could post the bumpers they like. There are so many, I want to see as many as I can before I spend my coin. I liked this one at first but I'm not so sure any more. Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted August 4, 2008 Share Posted August 4, 2008 Here ya go!! http://www.comancheclub.com/forums/view ... ht=bumpers Common thought.... One thing to remember, XJ/MJs have problems cooling. so the higher a winch is the more it blocks the already small radiator opening... CW Link to comment Share on other sites More sharing options...
MiNi Beast Posted August 4, 2008 Share Posted August 4, 2008 :laughin: Link to comment Share on other sites More sharing options...
J B Cuz Posted August 4, 2008 Share Posted August 4, 2008 I just welded up one of theses for a friend and it turned out great. it cost about 220.00 + 80 for the frame braces. www.ironscorpion.com/cart/index.php?act ... roductId=9 J B Cuz Link to comment Share on other sites More sharing options...
BLHTAZ Posted August 4, 2008 Share Posted August 4, 2008 I went with this one from Protofab4X4 on the front. I have done nothing with the rear yet. This front one weighs 96 lbs.. Link to comment Share on other sites More sharing options...
offroader461 Posted August 4, 2008 Share Posted August 4, 2008 here is my Protofab one w/o the pre-runner bar....I'm having Mike (owner) make me some custom sliders and rear bumper...its great that ive known his brother-in-law for 5 years now so all my stuff is discounted :D Link to comment Share on other sites More sharing options...
Motion Offroad Posted August 5, 2008 Share Posted August 5, 2008 Here are a few of the popular one's we sell that we've gotten very good feedback on. Just make sure if your going with a winch bumper that it ties into the rear frame rails and uses MORE than just the 3 factory holes on each side. MORE XJ/MJ Rock Proof Front Winch Bumper C4x4 XJ/MJ Tapered Front Winch Bumper (available with our without brush guard) C4x4 XJ/MJ Trailblazer Front Winch Bumper (available with or without prerunner bar) Link to comment Share on other sites More sharing options...
TNT Posted August 5, 2008 Share Posted August 5, 2008 I built this one years ago. On my MJ now. Image Not Found On my XJ a few years ago. Image Not Found XJ side view. The bumper has the same angle and lines up perfectly with the front skid. Image Not Found Link to comment Share on other sites More sharing options...
DansGreyMj Posted August 5, 2008 Share Posted August 5, 2008 this one is pretty nice ttp://www.loose-nuts-enterprises.com/newprod.htm Link to comment Share on other sites More sharing options...
highlandjeeper Posted August 5, 2008 Share Posted August 5, 2008 Disregaurd the Exploder in the pics. This is one I built for a friend and plan to do something similar for my Comanche. Link to comment Share on other sites More sharing options...
TNT Posted August 5, 2008 Share Posted August 5, 2008 this one is pretty nice http://www.loose-nuts-enterprises.com/newprod.htm Link fixed. That bumpers approach angle pretty much sucks. It's nice to be able to hit the bumper then just slide up and over a ledge. that bumper would stop you dead. The roller fairlead would be easy to trash also. I'm probably going to build up a prerunner bumper with a skid and stinger. Link to comment Share on other sites More sharing options...
mjdoa Posted August 6, 2008 Share Posted August 6, 2008 For Motion Offroad. re,the bumper with the grill guard. Do you sell just the headlight guards, without the grille guard? I have all but those 2 pieces,can't find anywhere on the intardnet. Thanks, Tracy. Link to comment Share on other sites More sharing options...
project88mj Posted August 6, 2008 Share Posted August 6, 2008 don't want to push stuff with this one i built ...but i can put my kc daylighters on it ;) Link to comment Share on other sites More sharing options...
MiNi Beast Posted August 6, 2008 Share Posted August 6, 2008 don't want to push stuff with this one i built ...but i can put my kc daylighters on it ;) uh mm, yeah. :hmm: Link to comment Share on other sites More sharing options...
Motion Offroad Posted August 6, 2008 Share Posted August 6, 2008 For Motion Offroad.re,the bumper with the grill guard. Do you sell just the headlight guards, without the grille guard? I have all but those 2 pieces,can't find anywhere on the intardnet. Thanks, Tracy. PM Sent. :cheers: Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted August 7, 2008 Share Posted August 7, 2008 http://comancheclub.com/forums/viewtopi ... &start=150 About half way down the posted thread is where I show the start on my front bumper. CW Link to comment Share on other sites More sharing options...
project88mj Posted August 7, 2008 Share Posted August 7, 2008 don't want to push stuff with this one i built ...but i can put my kc daylighters on it ;) uh mm, yeah. :hmm: uh mm, yeah that is all i need it to do :thwak: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now