Jump to content

Recommended Posts

Posted

Don't see why not.  I know I have siphoned some before just never tried to drain the tank.  Might be difficult to get 100% out cause making the hose be at the absolute lowest spot might be difficult, but seems like you could get most of it.

Posted

i wanted to do this few years ago during a fuel pump failure and dang near full of gas... 

tried a piece of fuel hose ?(5/16 ID) and i could not get it down the filler neck... 
for a 'test' I took a smaller piece of hard nylon tubing that was like 1/4" and it was troublesome getting it down there... 

maybe doable, but not easy.

 

Posted

If I were doing this and it’s only half a tank, I think I would pull the fuel pump and siphon it that way. 

Posted
1 hour ago, 89 MJ said:

If I were doing this and it’s only half a tank, I think I would pull the fuel pump and siphon it that way. 

Yep this, I tried using a syphon tube (the kind with the ball bearing at the end, I don't like sipping gas, lol) and couldn't get the end past 12"-15" from the filler tube.
From the sending unit side was easy

 

Posted

The pipes that put fuel into the tank are at a hard angle and make it tough to siphon fuel out. 
 

Better off using the pump itself to get fuel out or from the return side. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...