Jump to content

Recommended Posts

Posted

Don't see why not.  I know I have siphoned some before just never tried to drain the tank.  Might be difficult to get 100% out cause making the hose be at the absolute lowest spot might be difficult, but seems like you could get most of it.

Posted

i wanted to do this few years ago during a fuel pump failure and dang near full of gas... 

tried a piece of fuel hose ?(5/16 ID) and i could not get it down the filler neck... 
for a 'test' I took a smaller piece of hard nylon tubing that was like 1/4" and it was troublesome getting it down there... 

maybe doable, but not easy.

 

Posted
1 hour ago, 89 MJ said:

If I were doing this and it’s only half a tank, I think I would pull the fuel pump and siphon it that way. 

Yep this, I tried using a syphon tube (the kind with the ball bearing at the end, I don't like sipping gas, lol) and couldn't get the end past 12"-15" from the filler tube.
From the sending unit side was easy

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...