New Style Oil Filter adapter, which parts?

[knever3]

I posted in the wanted section and poked around in the search, but not finding what I am looking for.  I have the old Renix style oil filter that points to the rear of the engine, my short oil filter hits my Mean Green starter.  I need to change to the one that locates the filter upwards, plus it's hard to find filters for this Dinosaur.

 

Does anyone have one that want to part with, plus links to the O-rings would be a bonus!!  Thanks!

[89 MJ]

IIRC, the Renix oil filter points up at roughly 45*. Sounds like you already have the HO one. 

[hgeranium]

What 89MJ said. The Renix one is what you're looking for

[Eagle_SX4]

The oil filter adapter can be rotated to any angle you want. There is a location roll pin pressed into the block that can be removed and you can turn it any way you want. If you want to change the oil filter to the newer 3/4 thread the part number for the threaded adapter is 53007563AB. 

 

The oring sizes are listed here by Cruiser54

 

 

 

[fiatslug87]

Here is Cruiser’s write up on the switch so you can verify what you have.