RustyRodder Posted Friday at 07:40 PM Share Posted Friday at 07:40 PM Looking for some parts to swap my bucket seats to a bench. Still need a grey pair of seatbelt female ends, and a mini console in grey (Or any color- I'm talking to my cousin about 3D printing these). Thanks Link to comment Share on other sites More sharing options...
JolietJEEP'84 Posted Friday at 10:40 PM Share Posted Friday at 10:40 PM I'll check this for you. Link to comment Share on other sites More sharing options...
JolietJEEP'84 Posted Friday at 11:50 PM Share Posted Friday at 11:50 PM Sorry do not have either Link to comment Share on other sites More sharing options...
Pete M Posted 12 hours ago Share Posted 12 hours ago be aware that there's a change in seatbelt shape (the metal ends that plug in) 84-87 and 88+. they are not interchangeable Link to comment Share on other sites More sharing options...
RustyRodder Posted 2 hours ago Author Share Posted 2 hours ago 9 hours ago, Pete M said: be aware that there's a change in seatbelt shape (the metal ends that plug in) 84-87 and 88+. they are not interchangeable Thanks for the heads up- did not know that!! Also wish i had known what a pain it would be to track down parts when I swapped bench to buckets, and tossed things like seatbelts. Link to comment Share on other sites More sharing options...
eaglescout526 Posted 54 minutes ago Share Posted 54 minutes ago Female ends for the seat belts for buckets are reproduced. They’re just bendix buckles that damn near everyone used. Mostly Ford and GM used them. Not sure about Mopar. Link to comment Share on other sites More sharing options...
Recommended Posts