Parts needed for a waggy header

[Smokeyyank]

Past weekend I picked up a waggy header. What all is needed to get this on the MJ? There are no lights or harness. 

 

[eaglescout526]

The harness is probably the most important part to using that header. Otherwise it’s just a decoration piece. You can make a harness as all the plugs for the lamps are available, i don't know about the sockets for the turn signals and the side marker sockets are the same as what’s on the standard harness. 

[Smokeyyank]

1 hour ago, eaglescout526 said:

The harness is probably the most important part to using that header. Otherwise it’s just a decoration piece. You can make a harness as all the plugs for the lamps are available, i don't know about the sockets for the turn signals and the side marker sockets are the same as what’s on the standard harness. 

 

I'll have to make a harness. Do you know any part numbers or have a good source for plugs and such? 

[acfortier]

For the headlamps, RockAuto lists these: https://www.rockauto.com/en/catalog/jeep,1989,wagoneer,4.0l+242cid+l6,1184633,electrical-bulb+&+socket,headlamp+socket,4056

 

They look correct to me.

 

I'd compare the side markers + turn signal sockets to see if the current existing plugs from any MJ/XJ fit into it?

[Pete M]

side markers take the same sockets as MJs. 

[Pete M]

turn signals appear to be MJ taillight sockets (i.e. they are at a right-angle).  I'm assuming due to space constraints because of the radiator

[eaglescout526]

I have the plugs for the headlamps in my save for later on Amazon. I’ll have to get the numbers for that. 

[schardein]

Here are some pictures of the turn signal light bulb socket. 

[Smokeyyank]

Great, thanks.