Dammerung Posted January 13, 2021 Share Posted January 13, 2021 So, I’ve decided to finally tackle my coolant system because after 3 plastic bottles breaking, I’ve had enough. I bought an aluminum tank to replace the plastic one and it uses a radiator cap. What I want to know is, what is the pressure rating for the closed cooling system? P.S - I won’t switch to open cooling until I get a new radiator at the very least Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
PIKE Posted January 13, 2021 Share Posted January 13, 2021 Once you install the aluminum tank with radiator cap you WILL have an open system. An expansion tank for a 2.5 engine works very well. It bolts right in. The holes for the screws are already there. It mounts on the drivers side towards the front of the engine bay. You will have to relocate a few things. Then just run a hose from the expansion tank to the fitting below the radiator cap. Fill the aluminum tank to the top and keep an eye on the level in the expansion tank. It has markings for cold and hot levels. I believe the OEM cap for a 4.0 is 13 psi. Hope this helps. Link to comment Share on other sites More sharing options...
Dammerung Posted January 13, 2021 Author Share Posted January 13, 2021 Once you install the aluminum tank with radiator cap you WILL have an open system. An expansion tank for a 2.5 engine works very well. It bolts right in. The holes for the screws are already there. It mounts on the drivers side towards the front of the engine bay. You will have to relocate a few things. Then just run a hose from the expansion tank to the fitting below the radiator cap. Fill the aluminum tank to the top and keep an eye on the level in the expansion tank. It has markings for cold and hot levels. I believe the OEM cap for a 4.0 is 13 psi. Hope this helps.Wouldn’t the tank be pressurized still? I thought that an open system would have an expansion tank that is not pressurized. Or could I plug off that valve under the cap?Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted January 13, 2021 Share Posted January 13, 2021 for what it's worth, I have a closed system but with a modern radiator (with cap) and the cap is rated 16lbs and has never popped. Link to comment Share on other sites More sharing options...
Dammerung Posted January 13, 2021 Author Share Posted January 13, 2021 for what it's worth, I have a closed system but with a modern radiator (with cap) and the cap is rated 16lbs and has never popped. Thank you Pete! I’ll look into getting one. This little tank is some universal eBay one that I’ll have to fix up to make it work.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
PIKE Posted January 13, 2021 Share Posted January 13, 2021 1 hour ago, Dammerung said: Wouldn’t the tank be pressurized still? I thought that an open system would have an expansion tank that is not pressurized. Or could I plug off that valve under the cap? Sent from my iPhone using Tapatalk I assumed you had a Macs tank. If you filled the tank half way I guess it might work, maybe someone has tried it. You don't want to plug that fitting, that's where the pressure will escape. Link to comment Share on other sites More sharing options...
Dammerung Posted January 14, 2021 Author Share Posted January 14, 2021 What kind of hose clamps should I use?I don’t want to use the worm gears because they’re butt ugly and they’ve been letting me down recently.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
cruiser54 Posted January 14, 2021 Share Posted January 14, 2021 Isn't a new late-model radiator rather inexpensive? Kill 2 birds with one stone? Link to comment Share on other sites More sharing options...
Dammerung Posted January 14, 2021 Author Share Posted January 14, 2021 Yeah, but that’d take my truck out of commission for a while. I don’t have the time to replace a radiator with my school and everything.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Eagle Posted January 14, 2021 Share Posted January 14, 2021 On 1/13/2021 at 3:47 PM, Dammerung said: Wouldn’t the tank be pressurized still? I thought that an open system would have an expansion tank that is not pressurized. Or could I plug off that valve under the cap? Sent from my iPhone using Tapatalk What tank did you get? The one I used takes a radiator cap (I used a 13-pound), and it also has a barb fitting for a tube that goes to an overflow (expansion) catch bottle. This makes it functionally an open system rather than closed. Mine's a Moroso, but the Mac's tank specifically for the XJ and MJ didn't exist when I did mine. Here's the link to the Mac's tank: https://macsradiatorshop.com/product/macs-1987-1990-jeep-cherokee-aluminum-coolant-tank/ See the smaller fitting that's ON the filler neck? A radiator with a filler neck has the same thing. That's for the hose to the overflow catch tank. Link to comment Share on other sites More sharing options...
velco Posted January 14, 2021 Share Posted January 14, 2021 Or you can plug the overflow and keep running a closed system. I am using a 16-lb cap. Link to comment Share on other sites More sharing options...
Dammerung Posted January 15, 2021 Author Share Posted January 15, 2021 What tank did you get? The one I used takes a radiator cap (I used a 13-pound), and it also has a barb fitting for a tube that goes to an overflow (expansion) catch bottle. This makes it functionally an open system rather than closed. Mine's a Moroso, but the Mac's tank specifically for the XJ and MJ didn't exist when I did mine. Here's the link to the Mac's tank: https://macsradiatorshop.com/product/macs-1987-1990-jeep-cherokee-aluminum-coolant-tank/ See the smaller fitting that's ON the filler neck? A radiator with a filler neck has the same thing. That's for the hose to the overflow catch tank.https://www.ebay.com/itm/153133492767That’s the tank I bought. I think I’ve worked it out now.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Eagle Posted January 15, 2021 Share Posted January 15, 2021 Okay, so that barbed fitting on the filler neck is for the tube to an overflow catch bottle. Link to comment Share on other sites More sharing options...
Dammerung Posted January 18, 2021 Author Share Posted January 18, 2021 Just finished getting all the fittings for the tank as well as cutting, welding, and painting the bracket for the tankSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Dammerung Posted January 18, 2021 Author Share Posted January 18, 2021 Fully installedSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Eagle Posted January 18, 2021 Share Posted January 18, 2021 Nice job. You really NEED to either install a catch bottle or cap the fitting on the filler neck. If you don't do one or the other, you're going to be spitting hot coolant onto your starter solenoid. Link to comment Share on other sites More sharing options...
Dammerung Posted January 19, 2021 Author Share Posted January 19, 2021 Nice job. You really NEED to either install a catch bottle or cap the fitting on the filler neck. If you don't do one or the other, you're going to be spitting hot coolant onto your starter solenoid. Yeah that’s next on the list. I didn’t have any of those caps but I’m planning on going to an autoparts store to get them.Edit: just got a 5/16 vacuum cap and put a fuel line hose clamp on itSent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Eagle Posted January 20, 2021 Share Posted January 20, 2021 On 1/18/2021 at 8:10 PM, Dammerung said: Yeah that’s next on the list. I didn’t have any of those caps but I’m planning on going to an autoparts store to get them. Edit: just got a 5/16 vacuum cap and put a fuel line hose clamp on it Sent from my iPhone using Tapatalk Okay, by going that route, you have kept it a closed system. That means you should only fill that new tank halfway -- you have to leave air space for the coolant to expand when it gets hot. If you were to install a catch bottle, you would be converting to an open system and you could fill the new tank right to the top. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now