Muncher Posted September 22, 2020 Share Posted September 22, 2020 So i was wondering if anyone has mounted any storage boxes or anything to the back interior piece behind the seat. Or if its to weak to do that. Link to comment Share on other sites More sharing options...
derf Posted September 22, 2020 Share Posted September 22, 2020 How much weight are you planning on putting in it? It's sheet metal so it has its limits but it's a small space so I wouldn't expect you would have much that will fit back there. You could always build a box that rests on the floor and just attaches to the wall to keep from tipping when you fold the seat forward. Then you could put a bunch of weight in without worrying about it. Even if it just had some legs rather than fitting to the floor, it might be a better design. Link to comment Share on other sites More sharing options...
Pete M Posted September 22, 2020 Share Posted September 22, 2020 I bolted a 3/4 sheet of plywood to the rear steel wall and covered it with speakerbox carpet. lets me screw brackets and whatnot to it Link to comment Share on other sites More sharing options...
fiatslug87 Posted September 22, 2020 Share Posted September 22, 2020 21 minutes ago, Pete M said: I bolted a 3/4 sheet of plywood to the rear steel wall and covered it with speakerbox carpet. lets me screw brackets and whatnot to it How did you bolt it to rear wall? I'm looking into doing something similar. Link to comment Share on other sites More sharing options...
MiNi Beast Posted September 22, 2020 Share Posted September 22, 2020 i bolted my amp to wall with rubber liner in between. i used butterfly/toggle screws. left over from a drywall job. you could just liquid nail a sheet of ply to it really. i like wood as you can always screw to it like pete said. Link to comment Share on other sites More sharing options...
Pete M Posted September 22, 2020 Share Posted September 22, 2020 18 minutes ago, fiatslug87 said: How did you bolt it to rear wall? I'm looking into doing something similar. drilled holes in the upper corners of where the plywood would go, inserted bolts, tightened them. I probably added some goo to seal it up too. Link to comment Share on other sites More sharing options...
Muncher Posted September 22, 2020 Author Share Posted September 22, 2020 1 hour ago, Pete M said: I bolted a 3/4 sheet of plywood to the rear steel wall and covered it with speakerbox carpet. lets me screw brackets and whatnot to it Do you have any pictures of it? Becuase i have the raised carpeted peice in the back of my truck and would like to try to keep it looking like that Link to comment Share on other sites More sharing options...
Pete M Posted September 22, 2020 Share Posted September 22, 2020 I butted it up to the side trim Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now