krustyballer16 Posted March 31, 2018 Share Posted March 31, 2018 Need some of you guys' input on it since it might be something else I start building. This one is actually going on my XJ. I had an olddd nates 4x4 bumper made outta 2x4 tubing. Got it at a decent price, added a receiver, light protection and some "decorative" cover pieces on the side. I started ROUGH mock up at work. Its 24" of 5/16"x4.5" (closest i could find to what i needed) down each frame rail to build off of. 1/4" plate, 10" wide across the bottom to mount a winch to. And some different angles up front and I'll need something to mount a fairlead to.And d ring tabs will run down the frame tie ins I kinda wanted something that looks like the narrow dirtbound bumper. Throw some ideas and pics in here. For now it will only be as wide as the frame.Just for recovery. Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted March 31, 2018 Share Posted March 31, 2018 I always wanted a stubby bumper for the MJ. riiiiiight up until I saw the pic of the guy who crunched and destroyed the now unprotected corner on a tree. it reminded me that we don't have wranglers and so there's something in that corner. I had the thought of some sort of phantom protection (there, but not all that noticable) but never really got past the initial brainstorm. Link to comment Share on other sites More sharing options...
krustyballer16 Posted March 31, 2018 Author Share Posted March 31, 2018 I always wanted a stubby bumper for the MJ. riiiiiight up until I saw the pic of the guy who crunched and destroyed the now unprotected corner on a tree. it reminded me that we don't have wranglers and so there's something in that corner. I had the thought of some sort of phantom protection (there, but not all that noticable) but never really got past the initial brainstorm. Could fit right under the header panel and only stick out an inch or less... Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 5, 2018 Author Share Posted April 5, 2018 Worked on it a little tonight. When you want a nice clean cut and for it to be even on both brackets, you tack em together and use a slugger bit to get rid of most of the unwanted material then grind smooth. Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
Smokeyyank Posted April 5, 2018 Share Posted April 5, 2018 I was looking at doing something similar for the MJ, but I wanted a hidden winch bumper. I like the boostwerks design http://www.boostwerksengineering.com/BWE-Comp-Mount_p_14.html Here's my NAXJA thread about it http://www.naxja.org/forum/showthread.php?t=1147107 Some decent ideas in there. I haven't done a damn thing besides buy the winch, but the biggest thing I got some far was being able to remove the bumper without needing to unbolt the steering. Link to comment Share on other sites More sharing options...
75sv1 Posted April 5, 2018 Share Posted April 5, 2018 I have the Boostwerks hidden winch and the Logan 4X4 non-winch bumper. Not installed yet on my XJ. I am not sure if I want to cut the frame on the MJ. I am thinking about the Logan 4X4 inverted winch bumper. I think if you flip it upside down to get it tucked underneath. I am thinking of recessing driving lights into the bumper. Then possibly having fogs lower and back below the radiator or such. I'd wonder if you did some of the frame if DOM tube and put cover plates to fill the gaps. Sort of Scaggletti. Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 5, 2018 Author Share Posted April 5, 2018 This isn't a hidden winch bumper. I don't want to cut my crossmember out yet. But I plan on it sometime. I have a few people wanting me to make them a hidden winch setup.I was just wondering if there's anything anyone would want in a front bumper if I made them. This is all rough and I'd like to eventually have these lasered out and formed...Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
75sv1 Posted April 5, 2018 Share Posted April 5, 2018 I was also suggesting an inverted winch. Logan's 4x4 makes a bumper that way. I do not know the particulars. I personally do not want a bumper that sticks out a bunch. Also, I do not want to cut my frame on the Comanche. Link to comment Share on other sites More sharing options...
SatiricalHen Posted April 5, 2018 Share Posted April 5, 2018 I saw a guy on here or Cherokee forum who welded very slim wings on the stubby bumper that could barely be noticed but protect the sides. I believe they were wedge shaped so the edges were very slim, but had a strong backing. If I find it I’ll post up here.Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
SatiricalHen Posted April 5, 2018 Share Posted April 5, 2018 Found it Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 5, 2018 Author Share Posted April 5, 2018 Ya, thats what I told Pete up top^^ that's probably what I'll do for now. Looks good Except it's a hidden winch too... Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 5, 2018 Author Share Posted April 5, 2018 This is the goal for now. Just need my winch and s rings mounted. Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 5, 2018 Author Share Posted April 5, 2018 I'm lost lol. Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 5, 2018 Author Share Posted April 5, 2018 Gotcha. Well I asked everyone's opinion on here Cruz a couple members wanted me to build front bumpers but this is the first one I've built so..Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
75sv1 Posted April 5, 2018 Share Posted April 5, 2018 I like that thin wing bumper. A full plate on top, then sort of angled up on the sides of the wings. Maybe even stick out a few inches. Some head light buckets on both sides of the winch. Possible some fogs lower than the winch. Link to comment Share on other sites More sharing options...
DirtyComanche Posted April 6, 2018 Share Posted April 6, 2018 4 hours ago, SatiricalHen said: Found it Sent from my iPhone using Tapatalk How do you get at the clutch with that? Or just power it out? Link to comment Share on other sites More sharing options...
Smokeyyank Posted April 6, 2018 Share Posted April 6, 2018 13 hours ago, DirtyComanche said: How do you get at the clutch with that? Or just power it out? It's probably underneath. A few others guys I've seen have make a tool to access the clutch through the bumper. I believe it can only work Warn and not smittys but I'm not 100%. Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 7, 2018 Author Share Posted April 7, 2018 Going into the weekend with this. Gonna mount it and see how it looks and I'll know where to go from there...Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted April 8, 2018 Share Posted April 8, 2018 was looking for something else but came across the Jeep I was talking about: Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 9, 2018 Author Share Posted April 9, 2018 Got it mounted tonight and realized it's really ugly being so narrow so I made some rough cardboard patterns and cut some steel. Not sure where I'm going from here... Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 9, 2018 Author Share Posted April 9, 2018 Asked a few buddies for their opinions on it...this is what I got. Really supportive guys. Lol. Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
Pete M Posted April 9, 2018 Share Posted April 9, 2018 seeing it on the Jeep.... yeah, it does stick out far enough to start becoming a detriment to your approach angle. I can see why guys go with hidden and partially hidden winches. Link to comment Share on other sites More sharing options...
krustyballer16 Posted April 9, 2018 Author Share Posted April 9, 2018 seeing it on the Jeep.... yeah, it does stick out far enough to start becoming a detriment to your approach angle. I can see why guys go with hidden and partially hidden winches. But it actually sticks out an inch less than the nates bumper that was on there...Sent from my SM-G892A using Tapatalk Link to comment Share on other sites More sharing options...
Smokeyyank Posted April 9, 2018 Share Posted April 9, 2018 Gotta agree, it sticks too far out IMHO. Not just saying yours specifically, almost all those types bumpers in general I think look terrible. Link to comment Share on other sites More sharing options...
DirtyComanche Posted April 9, 2018 Share Posted April 9, 2018 4 hours ago, krustyballer16 said: But it actually sticks out an inch less than the nates bumper that was on there... Yeah, being stubby it just looks like it sticks out a long way. I'm not a huge fan of hidden winch bumpers because you can't see how the cable it spooling, and typically they no longer serve the purpose of a bumper, in that they no longer protect the body. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now