JeepcoMJ Posted August 3, 2007 Share Posted August 3, 2007 hey, will a trackbar off of a 89 4.0 pioneer shortbed work on a 86 2.8 longbed? the one on the 3800 is shot, the one that came off the 89 was replaced less than 2000 miles ago along with all balljoints, ujoints, brake pads, and upper control arms. so I guess I'd just like to get away with putting this one in the 3800, but they look a bit different...I assume they're the same or similar length and the only difference would be because they sit lower as a result of heavier engine and are therefore different in length by a half inch at most... Link to comment Share on other sites More sharing options...
JeepcoMJ Posted August 3, 2007 Author Share Posted August 3, 2007 anyone? Link to comment Share on other sites More sharing options...
akamcbird Posted August 3, 2007 Share Posted August 3, 2007 gimme a couple days i just got the '86 back and i can check Link to comment Share on other sites More sharing options...
tjbliley Posted August 3, 2007 Share Posted August 3, 2007 Yes it should fit up to 90. Link to comment Share on other sites More sharing options...
feerocknok Posted August 3, 2007 Share Posted August 3, 2007 Pretty sure they're all the same. If not, they all interchange. Link to comment Share on other sites More sharing options...
JeepcoMJ Posted August 4, 2007 Author Share Posted August 4, 2007 I'm just putting it in on sunday I think...the tracbar on the 3800 isn't safe for me to drive in speeds in excess of 45mph if I hit a bump...bumps make it death wobble side to side. I also think my UCA bushings are shot (still haven't replaced them...my engineering of the exhaust headers/manifolds means that I have to remove the driver's side one in order to remove the upper control arm bolts :( ) so I will be looking into that. Link to comment Share on other sites More sharing options...
DirtyComanche Posted August 4, 2007 Share Posted August 4, 2007 They're all the same, AFAIK. Link to comment Share on other sites More sharing options...
UNL1MTD Posted August 4, 2007 Share Posted August 4, 2007 They're all the same, AFAIK. x2 I bolted on the trackbar from my '05 wrangler onto the '87 comanche and it works fine. No difference in length at all, but the ball joint is greaseable, so thats a bonus. Link to comment Share on other sites More sharing options...
Eagle Posted August 4, 2007 Share Posted August 4, 2007 There's no difference by engine. Between the 86-90 and the 91+ there is a tiny difference in length. We tried to measure it or see it one day up at the dealership and we couldn't see it, but when I put a '93 track bar on my '88 XJ the steering wheel was about a quarter turn off and had to be re-centered. Works fine, though. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now