Rockfrog Posted March 29, 2015 Share Posted March 29, 2015 Ok ... Spent the better part of a day trying to find replacement hinge pins for my MJ. Anyone know if there are any? Or even a pin I can modify to suit. Going to tackle re-aligning the driver side door again, but it sags about 1/4" or so when it opens. I pulled parts from the 92 as far as shims and such go. Just need to replace these two pins. And do they just press up? Or do I grind the head and press down? Found lots on the 97+ hinges for XJ's but nothing other that rewelding the hinges to the body for earlier models. Link to comment Share on other sites More sharing options...
wvzj Posted March 30, 2015 Share Posted March 30, 2015 A lot a people claim the easiest way is to cut the pin in half, then drive the top one up and the bottom one down Link to comment Share on other sites More sharing options...
Rockfrog Posted March 30, 2015 Author Share Posted March 30, 2015 That's not possible with the 84-96 hinges ... Link to comment Share on other sites More sharing options...
Lee21490 Posted March 30, 2015 Share Posted March 30, 2015 I just made a thread about this the other day lol Part # is 55000765 Or 55008099 http://www.ebay.com/itm/55000765-PIN-HINGE-/131106287963?hash=item1e868b315b&vxp=mtr Link to comment Share on other sites More sharing options...
HOrnbrod Posted March 30, 2015 Share Posted March 30, 2015 Lol. Link to comment Share on other sites More sharing options...
Rockfrog Posted March 30, 2015 Author Share Posted March 30, 2015 I was looking at that one but thought it was about the door check pin, no way channel locks are gonna press out the hinge pins. Checked the eBay site ... Ouch! $24 shipping for two. Man, that's steep ... Guess ya gotta do what ya gotta do. Link to comment Share on other sites More sharing options...
Lee21490 Posted March 30, 2015 Share Posted March 30, 2015 I was looking at that one but thought it was about the door check pin, no way channel locks are gonna press out the hinge pins. Checked the eBay site ... Ouch! $24 shipping for two. Man, that's steep ... Guess ya gotta do what ya gotta do. http://www.amazon.com/gp/product/B008Y7MYI2/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 Might be a lil cheaper for shipping there. Mine comes in the mail tomorrow, Hope the old one comes out easily.. By the amount of slack in it, i think it is broke in half lol Link to comment Share on other sites More sharing options...
Rockfrog Posted March 30, 2015 Author Share Posted March 30, 2015 Down to $21 but parts are up to $9.24 dammit ... EBay it is then. Less hassle. I'll order extra and work on another generic crossover then. Link to comment Share on other sites More sharing options...
Rockfrog Posted March 30, 2015 Author Share Posted March 30, 2015 Thanks for those links by the way. Link to comment Share on other sites More sharing options...
yxmj Posted March 30, 2015 Share Posted March 30, 2015 Rockfrog.....I see by your location you might be near a Canadian Tire store. I was able to get a couple of pins that worked for me at my local CT.....they were in the "Help" section with all the replacement window cranks and trim repair pieces.......I am positive they were a doorman part.....sorry I do not have the number......but it might be worth your time to take a look. . :MJ 1: . Link to comment Share on other sites More sharing options...
Eagle Posted March 30, 2015 Share Posted March 30, 2015 What do the guys who convert to removable doors use? Seems to me I recall reading they use plain old 1/4" bolts (or maybe 5/16"?) Link to comment Share on other sites More sharing options...
yxmj Posted March 30, 2015 Share Posted March 30, 2015 Here is what I bought at CT....same kit http://www.jeep4x4center.com/door-hinge-pin-and-bushing-kit-55012900k.html Link to comment Share on other sites More sharing options...
Tommy Posted March 30, 2015 Share Posted March 30, 2015 I cut the pin in half and removed the bottom half of the hinge and pin so I can lift the door up and off. Doesn't really help. But I believe people use a 7mm roll pin. Link to comment Share on other sites More sharing options...
Rockfrog Posted April 25, 2015 Author Share Posted April 25, 2015 So ... Just to kill this beast. Got the eBay hinge pins, way off. Way to big and thin as paper. I ended up scabbing the door side hinges and pins off the rear of the 92 XJ I chopped up a few weeks ago. Not perfect but better. Had to cut the old hinges off as the stock roll pins weren't coming out for no one. At least now it's an easier fix in the future. Although I'll have to get my hinges welded back on if I do it again. Glooped some SikFlex on the hinge seams just to keep it dry. Link to comment Share on other sites More sharing options...
JEEPTRK Posted April 26, 2015 Share Posted April 26, 2015 Just go to a junk yard. Took me one minute with a hammer to pop it out of an old XJ. Install is a littler harder. Link to comment Share on other sites More sharing options...
Rockfrog Posted April 26, 2015 Author Share Posted April 26, 2015 You got lucky, the pins I did use had to have the hinges set in a vice, and spent time and heat to get them to finally budge. Used my u-bolt press to seat them so I didn't accidently hammer my hinges off the body. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now