Jump to content

Need Some Help Asap


Recommended Posts

guys, my son took my renix 2.5 on a road trip and the down pipe to the manifold bolts came loose and the nuts dropped off. the pipe became disconnected and the heat melted the tubing that comes out of the tb and goes to the fitting in the rear of the vc also the tube that runs to the tb right next to it and runs along the fire wall an up towards the front of the engine compartment (not sure where). the truck is in a shop 250 miles from home. the vacuum harness is also damaged. the guy that has the truck is going to look start the work today and will call me with an update. is the vacume harness available for an 87 2.5?  i'll try to get some pics and post them up later. 

Link to comment
Share on other sites

  • Replies 52
  • Created
  • Last Reply

Top Posters In This Topic

Unfortunately they don't make the vacuum harnesses for the 2.5s....

The shop would have to make their own vacuum harnesses which I saw the other day they are coming back out with the hard plastic vacuum lines and other accessories to make a complete harness at advance auto....

Link to comment
Share on other sites

guys, the shop that has my truck says they need a vacuum valve that sits by the exhaust. he says it goes in a vacuum line that runs between the tb and the map sensor but dosen't know what it's called so he can get one. any help??

Link to comment
Share on other sites

  • 2 weeks later...

how do i increase the size of my images posted here from flikr? i really need some help but for you guys to do that i need to increase image size. can't figure this out. 

please help.

Link to comment
Share on other sites

finally got the truck back and the guy that had it (200 miles away) screwed up all the vacuum lines. need some help asap. i know the pics are small and i can't figure out how to increase the sizes. please bare with me, i need your help.

 

pic#1 here is of a line that is conected to the tb and runs to the fire wall. is this correct?

14165878847_0549157726_m.jpg

 

pic #2,3, and 4 is of 2 lines of different diameter that run from a canister on passenger side and are not conected to anything.

14165886577_3687cd90db_m.jpg

 

14372545203_ae989585bc_m.jpg

 

 

 

 

 

 

14350790622_4be56cd408_m.jpg

 

this last one is of a nipple on the air intake that had nothing conected to it when i got it back.

14350796902_41abcee433_m.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


×
×
  • Create New...