willi2ds Posted October 22, 2012 Share Posted October 22, 2012 Just saw this over on another forum JCR is planning a bumper coming out in a month or so from what the article says I Like It Link to comment Share on other sites More sharing options...
Usamedic Posted October 22, 2012 Share Posted October 22, 2012 Where to put the plate.....lol Link to comment Share on other sites More sharing options...
willi2ds Posted October 22, 2012 Author Share Posted October 22, 2012 Def not perfect, just nice to see some MJ support out there Link to comment Share on other sites More sharing options...
COFFMAN Posted October 22, 2012 Share Posted October 22, 2012 I like how the corners have been done, tow points don't qiute do it for me Link to comment Share on other sites More sharing options...
Incommando Posted October 22, 2012 Share Posted October 22, 2012 I could work with that Link to comment Share on other sites More sharing options...
danbyrambler Posted October 22, 2012 Share Posted October 22, 2012 Where to put the plate.....lol Might be the Missouri 12K GVW model Link to comment Share on other sites More sharing options...
johnnyc Posted October 23, 2012 Share Posted October 23, 2012 I like that bumper. It's got some nice lines and I like the ends. I'd just put the license plate on one of those holders that slide into the receiver. Or I'd get it without the receiver and screw the plate in the center of the bumper. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted October 23, 2012 Share Posted October 23, 2012 or have it off set between the receiver and recovery points. kinda like a KJ Link to comment Share on other sites More sharing options...
87Warrior Posted October 23, 2012 Share Posted October 23, 2012 I plan to place my order on black friday. I don't know what rig I will put it on, but by-golly I won't miss out on the bumper again. Link to comment Share on other sites More sharing options...
Backdraft Posted October 23, 2012 Share Posted October 23, 2012 I plan to place my order on black friday. I don't know what rig I will put it on, but by-golly I won't miss out on the bumper again. Ditto what Brett said. I've been needing a decent rear bumper to replace the bent stock bumper and this looks to be just the ticket. I'd certainly like a provision for a plate and light, but its not a deal breaker. And since its a DIY bumper, I'm sure I can improvise and come up with something. Besides, I have their front winch bumper and really like it. A rear bumper from the same manufacturer would satisfy my touch of OCD. Link to comment Share on other sites More sharing options...
COFFMAN Posted October 23, 2012 Share Posted October 23, 2012 Dose anyone know the price, and what dose the DIY mean ? weld the pieces youself ? Link to comment Share on other sites More sharing options...
Backdraft Posted October 23, 2012 Share Posted October 23, 2012 They say it will be on par with their XJ DIY rear bumper which runs $220US. They also state that the black Friday sale price will be lower than that. Also you are correct. You do the welding. DIY=Do It Yourself. They ship the bumper to you in flat pieces that are cut and ready to be assembled. You receive the kit and bend/weld the pieces together, then finish it how you like. Link to comment Share on other sites More sharing options...
COFFMAN Posted October 23, 2012 Share Posted October 23, 2012 name='Backdraft' timestamp='1350998098' post='357285']They say it will be on par with their XJ DIY rear bumper which runs $220US. They also state that the black Friday sale price will be lower than that. Also you are correct. You do the welding. DIY=Do It Yourself. They ship the bumper to you in flat pieces that are cut and ready to be assembled. You receive the kit and bend/weld the pieces together, then finish it how you like. [/b] Well that puts a different spin on things, a little twek here a little mod there. Umm might have to check out shipping costs. Thanks backdraft Link to comment Share on other sites More sharing options...
brimy311 Posted October 24, 2012 Share Posted October 24, 2012 Where to put the plate.....lol Drill a couple holes through the bumper, bolt on your plate. If you want to get fancy, take a grinder and do some cutting. This bumper is DIY, you do all the assembling, welding and grinding. If you what something different, you can take out a grinder or torch and go at it. It's a great platform at a great price for those that have the ability to put it together. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now