my86mj Posted May 4, 2012 Share Posted May 4, 2012 okay here's one for everyone. what in your opinion is the best sounding exhaust setup you've heard on a MJ. i have a 2.8 and when i got it was factory to a flowmaster. ripped the rotted flowmaster off and ran open cat sounded raspy and kind of rally car like. then one night we discovered that the cat was getting plugged so we pulled it and put a thrush glasspack with a flowmaster to 3 inch to the bumper. deepest sounding 2.8 ive ever heard. can anyone do one better? and yes i know your inline sounds great unrestricted. :clapping: Link to comment Share on other sites More sharing options...
AMCJeepMJ Posted May 4, 2012 Share Posted May 4, 2012 what in your opinion is the best sounding exhaust setup you've heard on a MJ. Stock setup. Quiet = good. Obnoxious = bad. Link to comment Share on other sites More sharing options...
Blue88Comanche Posted May 4, 2012 Share Posted May 4, 2012 what in your opinion is the best sounding exhaust setup you've heard on a MJ. Stock setup. Quiet = good. Obnoxious = bad. :agree: however i would like mine to sound a little deeper, like the V8 in my grand cherokee but still be just as quiet as the stock setup Link to comment Share on other sites More sharing options...
hick92 Posted May 4, 2012 Share Posted May 4, 2012 my h/o just sounds like a beast and i love it but everyone else hates it late at night Link to comment Share on other sites More sharing options...
86FUBAR Posted May 4, 2012 Share Posted May 4, 2012 Iv got a 3.4 in my manch ( 2.8 and 3.4 sound the same...) and have been running a 2 chamber flow with the outlet torched out to a 4" hole with a 4" turn down welded on and it sounds awsome !!!! i like loud and obnoxious because it pisses everyone else off . but besides all of that i do think it sounds really good . iv got some vids on youtube of the exhaust but can't post them from work so i will try to do that later . Link to comment Share on other sites More sharing options...
skidoo_j Posted May 4, 2012 Share Posted May 4, 2012 I run a dynamax header no cat and a flomaster 40 delta with 2.5" pipe through out. Sounds really clean, Pretty deep but quiet too. Link to comment Share on other sites More sharing options...
Eagle Posted May 4, 2012 Share Posted May 4, 2012 In-line sixes are tough, because the power pulses are perfectly evenly spaced. It can't really even begin to sound "good" unless you change to a lumpy cam with a high lift and short overlap. For a stock engine: Gibson. http://www.gibsonperformance.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now