Jump to content

car dolly


pug
 Share

Recommended Posts

Ok thanks What about pulling with factory dakota bumper or do i have to have a hitch.

My truck has 235/75/15's and had plenty of strap left over on a Uhaul rental. Check your bumper it should have the tow capacity stamped in. If you are renting the dolley they will decide if your bumber will work or if you need a hitch. You can also go to the Uhaul website and plug in your tow vehicle and the vehicle in tow and see if it will allow you to rent.

Link to comment
Share on other sites

like said above, check the bumper the weight it can tow will be stamped on it. but remember, that's what a NEW bumper is rated for. the more rust it has, the less strength it's got.

 

 

frankly, if you're towing anything heavier than a ford festiva on it, you really ought to have a class 3. just the trailer weighs 1/3 of most bumpers load capacities.

Link to comment
Share on other sites

Uhaul usually won't rent a dolly to anyone with less than a 3/4 ton.

 

Maybe your U-Haul.

 

I have rented dollys in a few different places and towed it with my WJ. As long as it is not an open top Jeep or a Explorer and the vehicle being towed does not out weigh the tow rig they will rent them to you.

 

I rented a dolly and towed it with a Intrepid from CA to GA.

Link to comment
Share on other sites

Where are you going with the load?

 

I use Uhaul to move and haul things. They may not let you pull an MJ with a Dakota, but it really depends on what tow rating the Dakota has. The tow dolly straps are pretty well used up with a 30" tire. You may need to let air out of your tires, strap it down then add air to you tires (to protect the bead).

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...