STERLING STINGER Posted May 27, 2011 Share Posted May 27, 2011 i never saw or heard of these....i like it except for the bed http://cgi.ebay.com/ebaymotors/Jeep-OUT ... 27bb27201b Link to comment Share on other sites More sharing options...
hick92 Posted May 27, 2011 Share Posted May 27, 2011 I'm just goin to put this out there to me it seems like a j10 with a different bed on it a costum interior Link to comment Share on other sites More sharing options...
jimoshel Posted May 27, 2011 Share Posted May 27, 2011 :agree: , Not knocking it. It is nice. It's kind of obvious it was built strictly for the show circuit and not everyday use. Link to comment Share on other sites More sharing options...
87Warrior Posted May 27, 2011 Share Posted May 27, 2011 They didn't even have the decency to paint the engine bay :doh: Probably has 118,000 miles on it, not 18,000. It does look clean, but it should after a fresh paint job. Link to comment Share on other sites More sharing options...
tallon2064 Posted May 27, 2011 Share Posted May 27, 2011 Didn't even trim the opening for the 4WD lever just cut a hole for the shifter. :hmm: :doh: Link to comment Share on other sites More sharing options...
Blue88Comanche Posted May 27, 2011 Share Posted May 27, 2011 I saw that on ebay this moring too.. I thought it was neat. Link to comment Share on other sites More sharing options...
ParadiseMJ Posted May 28, 2011 Share Posted May 28, 2011 Just my own opinion...but...fuggin fugly. Put a trailer behind it and drive it to the Senior Center. May be up to the job, but really, would you take it to Moab or even to the store?? Turn in your MJ badge. ...and those pipes?? Somebody is overcompensating for shortages elswhere...what a nudge!! ...once again, my own personal opinion. If anyone listening wants to pimp their Jeep, this is surely the way to go. Great workmanship, I wish I had the time and skill to do alot of this stuff, but I don't have a pimpmobile. Link to comment Share on other sites More sharing options...
Eagle Posted May 28, 2011 Share Posted May 28, 2011 I don't want it, but I do think the bed is interesting, and I might be tempted to fabricate something like that for an MJ if I had one with a trashed bed. Except that my bodyworking skills are limited to unbolting an old door or fender and bolting on a new one ... Link to comment Share on other sites More sharing options...
STERLING STINGER Posted May 28, 2011 Author Share Posted May 28, 2011 Sheesh. No crazy critics here. Its just a pic Relax. Link to comment Share on other sites More sharing options...
Incommando Posted May 28, 2011 Share Posted May 28, 2011 You never heard of these because they do not exist. Just some hang-over induced pile o' (insert word of choice here) with a bunch of jeep names added to it. "Hey, aren't da jep trucks called copmanchero's or sumtin'? Let's call it a comanche outlaw..." :wall: As far as they level of customization: the rear shackles are, IMHO, death traps. That is probably an indication of the whole level of fab on this POS and a good reason why people whose family tree doesn't branch shouldn't be allowed to modify or sell vehicles. All it is missing is wide whitewalls and curb feelers. Stupid semi stacks on a pick-up are more played out then ricer wings on a Honda. And the "letterin" in the grille??? :nuts: If that is a 1973 drivetrain I will eat my hat. That ignition system was a '78 or newer and does not look swapped in. The transfer case is from the '80's as are the headlights ('79 or newer.) The axles (AMC M23 rear) also indicate that the thing is actually am '80-'85 J10. They don't list the VIN because this is such a hodgepodge... I am hoping that they never got around to the ammeter bypass mod and it burns to the ground so it doesn't have to look at itself in mud puddles as it drives past..... :peek: Link to comment Share on other sites More sharing options...
STERLING STINGER Posted May 28, 2011 Author Share Posted May 28, 2011 Ya. Take that society. Down with the man!!!!! Link to comment Share on other sites More sharing options...
pamike Posted May 29, 2011 Share Posted May 29, 2011 that is definitly a 1980. i'm 99.9999% sure. the drivetrain and the style of the wiper motor were the first things i seen that gave it away. and 80 was the last year for the brow above the windshield. Link to comment Share on other sites More sharing options...
Incommando Posted May 29, 2011 Share Posted May 29, 2011 The engine, ignition, axles, t-case shifter, brow, etc.. all point to it being a 1980 as the year when all of those pieces were put together. Good eye. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now