JeffN Posted January 20, 2011 Share Posted January 20, 2011 has anyone gotten any of the new lights off Ebay? I was wondering if you did if I could get some feedback on the quality of them. http://cgi.ebay.com/ebaymotors/Jeep-Com ... _500wt_956 Link to comment Share on other sites More sharing options...
btm24 Posted January 20, 2011 Share Posted January 20, 2011 I know of a few who have done that and they say its brighter then the stock ones. also not to much $. Brandon Link to comment Share on other sites More sharing options...
RDAN1 Posted January 20, 2011 Share Posted January 20, 2011 IMO Quality is very good plus. I bought a pair to install and feel they are very well made. Also there are a couple of threads on here of folks using them and the steps to install them. They are also sold by this company. http://www.infiniteinnovations.com/main.asp?p=4_179 which is where i bought them for 8.65 each. they have a minimum order charge but if you find other lighting on their site you need, they may be cheaper than the e bay source. Link to comment Share on other sites More sharing options...
MJRemi Posted January 20, 2011 Share Posted January 20, 2011 IMO Quality is very good plus. I bought a pair to install and feel they are very well made. Also there are a couple of threads on here of folks using them and the steps to install them. They are also sold by this company. http://www.infiniteinnovations.com/main.asp?p=4_179 which is where i bought them for 8.65 each. they have a minimum order charge but if you find other lighting on their site you need, they may be cheaper than the e bay source. :agree: I'm very happy with these lights in function and appearance. The named limo company also sells seat belts so if you need them you can get around the high shipping fee for just the lights. Link to comment Share on other sites More sharing options...
KYMJ Posted January 20, 2011 Share Posted January 20, 2011 Wish I would have found these before I changed mine for the ones in the thread below. One question: I had to trim a little to fit the ones I used. Will these cover the bigger hole? :dunno: viewtopic.php?f=9&t=3490 Link to comment Share on other sites More sharing options...
RDAN1 Posted January 20, 2011 Share Posted January 20, 2011 Wish I would have found these before I changed mine for the ones in the thread below. One question: I had to trim a little to fit the ones I used. Will these cover the bigger hole? :dunno: viewtopic.php?f=9&t=3490 I'm not sure..the outside measurements of these according to the manufacturer is 4.0w X 1.75h inches... Link to comment Share on other sites More sharing options...
glundblad Posted January 20, 2011 Share Posted January 20, 2011 There was also a post that said Taurus trunk lights work too but do not require any triming of the interior panels. I havent tried it yet but I thought I would give it a try. I would be very careful about buying used OEM B Piller lights off ebay by the way. Some guy was selling a pair awhile back with broken tabs. I think everyone has a pair of those. :shake: Link to comment Share on other sites More sharing options...
91coMANche Posted January 20, 2011 Share Posted January 20, 2011 If your stock ones are loose you can try what I did and wrap them in self bonding tape. Its a rubbery tape you can buy at homedepot and is used in electrical work where being water tight is important. Just wrap up the back of the light and ease it into the hole. There is also a silicone tape you could use. Tabs are a thing of the past when you can get as good of a fit as I've achieved. Link to comment Share on other sites More sharing options...
MJRemi Posted January 20, 2011 Share Posted January 20, 2011 Wish I would have found these before I changed mine for the ones in the thread below. One question: I had to trim a little to fit the ones I used. Will these cover the bigger hole? :dunno: viewtopic.php?f=9&t=3490 When I installed them I trimmed the pillar panel opening about 1/16" for length. Height was perfect fit. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now