bighause Posted January 20, 2011 Share Posted January 20, 2011 Draw Tite Class III hitch specifically for the rear of a Jeep Comanche. $125 obo Link to comment Share on other sites More sharing options...
Fire4755 Posted January 20, 2011 Share Posted January 20, 2011 How much to ship to Exton Pa 19341 Link to comment Share on other sites More sharing options...
bighause Posted January 20, 2011 Author Share Posted January 20, 2011 According to FedEx it would be around $40 based on 35lb weight and dimensions of 46" x 16" x 8". I doubt I could find a box for it :hmm: Link to comment Share on other sites More sharing options...
jimoshel Posted January 20, 2011 Share Posted January 20, 2011 Really don't need a box. Just make sure you attach the address tag secure. Link to comment Share on other sites More sharing options...
Fire4755 Posted January 20, 2011 Share Posted January 20, 2011 Send me an email I'm interested. Jamierocksthesnow@yahoo.com Link to comment Share on other sites More sharing options...
JACKED88 Posted January 24, 2011 Share Posted January 24, 2011 Sent you a P/M. Link to comment Share on other sites More sharing options...
bighause Posted January 27, 2011 Author Share Posted January 27, 2011 Sold :cheers: Link to comment Share on other sites More sharing options...
LEAD_NOT_FOLLOW Posted February 3, 2011 Share Posted February 3, 2011 Received it. Thanks again for a good transaction! :cheers: Link to comment Share on other sites More sharing options...
skidoo_j Posted February 4, 2011 Share Posted February 4, 2011 once installled could you send me photos i have not seen a comanche with a receiver in my area and it looks like this will ride crazy low. Received it. Thanks again for a good transaction! :cheers: Link to comment Share on other sites More sharing options...
fiatslug87 Posted February 4, 2011 Share Posted February 4, 2011 ...it looks like this will ride crazy low. The Draw-Tite hitch doesn't hang very low, see pics. Some others do (one made by Valley Hitch) Link to comment Share on other sites More sharing options...
Dechion Posted February 4, 2011 Share Posted February 4, 2011 One thing that would be a great asset would be if you could make a good drawing with all the measurements and such, particularly for the side plates. It would be nice to be able to make some side plates for the reese universal hitch that would make it a straight bolt on. (replace the side "L" brackets you bolt through with a straight plate with the proper bolt holes and height) Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.