Bonkers Posted September 12, 2006 Share Posted September 12, 2006 Here's the scenario. I came across a relatively cheap 90 Xj this morning. All I want out of it is the Ax15 swap, but for the asking price that's way too much. However while looking it over I'm wondering what other parts I can use. I can't tell if the motor is renix or not, but it sure looks it. The power windows would be a nice touch if they can be waterproofed. I know the seats and driveshafts are both throwaways. I can make $50 on the dash cluster. My Mj is a 89 Pioneer. Let me know opinions quick. Link to comment Share on other sites More sharing options...
BrettM Posted September 12, 2006 Share Posted September 12, 2006 90 is still Renix, I always look at the throttlebody to confirm because it's distinctly different. The front driveshaft isn't a throw-away. Link to comment Share on other sites More sharing options...
Pete M Posted September 12, 2006 Share Posted September 12, 2006 You may need the 23 spline t-case too. Link to comment Share on other sites More sharing options...
rejeep Posted September 12, 2006 Share Posted September 12, 2006 They are the same jeeps, minus a bed. you will deff need the case of swapping for a ba10. Link to comment Share on other sites More sharing options...
Oizarod115 Posted September 12, 2006 Share Posted September 12, 2006 4-door? the whole doors are the same spare axleshafts n such, sensors, electric fan Link to comment Share on other sites More sharing options...
whowey Posted September 13, 2006 Share Posted September 13, 2006 Front doors, and everything from the top of the A-pillar to the front bumper are the same. The main exception is the body harness. But like they said, the front D-shaft and T-case if you are doing the AX-15 swap. Link to comment Share on other sites More sharing options...
89MJComanche Posted September 14, 2006 Share Posted September 14, 2006 I'd go for a newer external slave cylinder AX15 instead of that 1990 one. Link to comment Share on other sites More sharing options...
87manche Posted September 14, 2006 Share Posted September 14, 2006 I'd go for a newer external slave cylinder AX15 instead of that 1990 one. good luck with that, they fetch quite a premium. I could go and buy a 4WD AX-15 with BH for $300, but if I want the later model external slave one the price goes to $500. Link to comment Share on other sites More sharing options...
Pete M Posted September 14, 2006 Share Posted September 14, 2006 There's nothing wrong with an internal slave, until something goes wrong. And even then it's only a huge problem if dropping the trans is a huge problem. To some people out there, it isn't that big a deal. I'm sorta in the middle on that one. It's a pain, but I can do it. I bought an external slave bellhousing for my truck ONLY because I found one cheap AND because the internal slave was already toast AND because all the parts came with the external bellhousing. So as long as all the used parts are good, I fixed my bad internal slave for like $35. The big reason the External slave transmissions are more money is simply because they are newer and tend to be lower mileage. Link to comment Share on other sites More sharing options...
s10eater Posted September 15, 2006 Share Posted September 15, 2006 i have heard somewhere that mjs and xjs are the same firewall forward!? not sure if its 100% but some things are for sure Link to comment Share on other sites More sharing options...
Pete M Posted September 15, 2006 Share Posted September 15, 2006 Pretty much, yes. There are some things that XJs had that MJs didn't (like a washer bottle with a second pump for the rear window). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now