rockhardzj

http://detroit.craigslist.org/car/375697760.html :drool:

Yes, you read it right, this girl is from 1897, her owner even even gave her a nice tummy tuck. All in all, looks like a pretty nice truck to have. He's even throwing in a first aide pack! That's something you don't usually see... http://portland.craigslist.org/mlt/car/403810823.html

FIFTY!!! Bling Bling, Yo! :D It gave me a good laugh. Now I want to go save that thing, or blow it up or something with that guy in it for ruining such a fine automobile...

John, check for any leaks, wet spots or anything anywhere along the line, down to the bellhousing. You may have a bad slave cyl coming fast. Also, if it's spongy, I'd be willing to bet you have air in the line, which gives it room to compress before it compresses the liquid.

I dunno, an oily one? Standing on end, out of my way... My brother is a toyota driving/modding moron. I know it's a 5spd out of a 86.5 supra. I also have an 83 celica supra rotting out at the farm... It's got a moonroof, and a ghey parking lot paint job...

The only thing I can say from secondhand experience from Clayton's is they take 2 weeks more than they say they will. But their quality, and customer service is outstanding. They work on a personal level, and make happy customers. If it was in the budget, I'd send my MJ off to them, and have them build a custom suspension front and rear. I haven't really heard any bad feedback on TNT, but I only know of 102 people that have used them...

There's 3 Grand Island's I know of, Mine, not so grand, and I haven't visited the other two. I'm up in NY, I guess i should add that... Sorry, Name doesn't ring any bells... Mine will be an MJ base, with some XJ addon's, and WJ comfort/power to boot.

Damn! Why did I get rid of my Puke Goat? Oh well, I have a few other trannies around to dick around with, maybe I'll do that to the one out of the supra... :D Then sell the parts to ricers...

Rusty's can shove it, I had terrible customer service, and they don't give you jam nuts for your LCA's, which IMHO is a stupid thing to do.

I just so happen to have a D30/35 combo of ring and pinions. I'm not sure I want to sell the 30 set yet, but the 35 set is up for grabs, cheap cheap!.

One more wicked feature to add to the list for this project... HEATED SEATS!!! :D

So? My next project MJ will see a 4.7L V8... :D

I saw "89 Commanche" written on the fender of a junkyard MJ. Barely 6 inches from the emblem. :D I was going for a regular image of him, but that just made me laugh pretty hard!

Also, how is your carrier all jacked?

What's your old axle? A D35, or a D44. If you had a 44, then DO NOT CHANGE IT! the 35 is a POS, and not worth changing. I've had nothing but problems with them, albeit small, they piss pinion bearings like crazy. I just pulled the pinion out of my old D35, and the bearings were pretty damn loose. In my MJ, I'm swapping the 35 to a 8.25. I never got to run the MJ previous to the swap, but when I pulled the cover, it was filled with a half inch layer of sludge in the bottom, above that, the gear oil, and above that, about an inch of water. We don't have any more d35's sitting under our vehicles here. It's all 8.25's and d44's now, well, except for my ZJ... Also, why bother with all the work to knock the old perches off a crappy axle, just to put the same axle back in? It just doesnt make sense in my opinion

Sweet! Tell them to practice bulldozing out back, and make a few nice moguls, with a pond next to them!

I just took a 5.5" RE MJ kit off my MJ. Here's RE's New MJ kit It runs $1,160. Here's RE's XJ Equivalent It runs $1,462

Maybe all their emblems fell off?

In the yellow blazer one, it looks like the passenger headlight is looking at the ground... Kind of like a googly eyed person... They all look great though, I wish I was that good!

No title. I'd make an agreement with the guy and keep it for a few years in a barn, and then go to DMV and tell them you saw it for the longest time on the dudes property, bought it cheap off him, and want to get a replacement title. It works under the abandoned vehicle rules in your state's DMV, or at least here in NY, it does...

'Tis what I'm doing!

Well, You have asked that I find the site that searches all CraigsList cities. Unfortunately, it's been quite a while since I used the one site that actually worked half decent. They all are getting the rotten crabage thrown at them as Craigslist tells them to shut down as they go agains CL's theory of a "localized search". I find it pretty ghey of CL's end, and frankly, if I made a program, and they found out about it, I'd tell them to shove it. anyways, after a little tooling around, I've got all the cities down with the search string, so now comes the hard part. I've got to make the engine to search the strings! I've never built a search engine before, but I'm going to try my best. Worst case scenario, we get to add each xml link into a XML Reader such as Google Reader, and search that way. wish for the best... EDIT:I've given it a name: Project: "zerohour" Please see this post for further instructions! One more update: Here is the publicly shared list of it all, check it out, I'm sure you'll find some goodness, and I do all your hard work! http://www.google.com/reader/shared/036 ... 6809901508

Nah, do a 502/502... :D

Pete, we need more smilies!!! Thats funny! :D

Thats my other plan. Going to see how cheap a cell and pump is first.