BLHTAZ

Excellent... :cheers: I had to copy it and save it in my MJ files. ;)

Yes...extreme caution is strongly advised with the install. One tiny little nick in the seal will allow a surprising flood of oil to be produced ;) ...I wonder how I know that ... :roll: :oops:

OMG...I wish I had a dollar for every time I have heard that from my years in the aftermarket 4x4 business and on the Internet...I would be retired right now at 43 :cheers: . Glad to hear that it's working out and that you are happy with the way it's going.

Since we don't wheel the MJ, I can only participate in this stuff with our YJ. These are from several years ago when we liked mud, but we don't like it any more since discovering rocks I did get out of this without help... Me pulling a TJ through the puddle... ;)

:hmm: I have never seen that issue... :nuts: The seal has always been easy to push one end and it rotates a little so you can grab it and pull it out. Sorry for the worthless post, but I am curious about what the issue is to... :chillin:

OK...I finally got in touch with Wojtek. He has been out of the country for a little more than 2 weeks with family in Poland. He had shut down the PayPal payment method while he was away, but the Google checkout still works. He said he would have the PayPal set up again in a couple days or so. He also said that his email address had to be changed. He has not been receiving emails for some reason and after consulting with Yahoo, the had to change the address. The new address is ... PAInjectors@yahoo.com ... Please be sure to use the new address for all future contact with him. Please don't forget that the coupon/discount code of ' JEEP ' will get you a 10% discount when used at checkout ;) Let me know if there are any further problems... :cheers:

That is quite a loaded question. It depends on what is causing the fuse to blow, but it's not very likely that the AC will work if a fuse is blown. The blower motor itself may be bad and causing it to blow or there is a short in the wiring somewhere that is going to have to be traced and repaired. I hate electrical problems as they can take forever to figure out and I am not good with electronics at all :mad:

That's a tire that I have never seen before, but I like it...good job :cheers: .

They definitely are rapid breeders, but we work with a rescue organization and we all strongly encourage every responsible Bunny owner to have them fixed. Both Peanut and Cookie have been Spayed/Neutered as well as all of the Bunnies that are in the rescue organizations. I have never been a big "pet" person in general, but these little creatures are quite interesting and are very little trouble to maintain. They are quite easy to train after they have been fixed and their hormones don't control them any more ;) .

The '97 - '01 door weather strips are a bit more expensive. The CC cost on them will be $75 each, so let me know if you prefer them. I have been very short on staff this week, and especially today, so I have not had time to work on this stuff yet. ;) I have to work tomorrow (Saturday) and we are typically slow so I will try to get some stuff organized then.

Sorry guys, but I have been very busy this week. Please send me a PM if there is something going on that you would like my help with and I don't see it or respond to posts ;) Thanks to mjdoa for calling me today to let me know about this one. Ya'll look at this picture and let me know which pieces you want prices on. The full door surround weather strips (#17) are $56.50 each as I just priced those for someone else the other day.

Welcome to the Club!! Sounds like a decent little project :cheers: Be sure to post up some pictures and keep this thread updated as your project moves along ;) .

I have not yet figured out what is going on with them. Since I am the one that met one of the owners (the son) and got to know him personally while he lived here in Olrando (he's now in NY)...I figured I would chime in here. I have received a few PM's about this because of my postings about the injectors and the deal that I had set up with them that prompted me to start looking in to it. I have tried repeatedly to contact Wojtek as they have changed the site and the last time that I saw an eBay auction up from them it said that they were no longer using the previous eBay Username becasue the person handling the Internet stuff had left the company. As far as I know, Wojtek was the one doing all the website & eBay work so it sounds like there has been a "family" problem that is causing some big trouble with the business as well. I found his cell phone number last night so I will be trying to call him today as I have the chance.

Cookie, the Black & White female is up for adoption. Peanut is our little guy. Peanut has free run of the house and has a cat door to get out on a screen porch. He has a litter box out on the porch that he is very good about using and almost never leaves any little balls in the house. It is quite amazing that they can be so well trained. I have built a page on our site for them. Check out www.HugABunny.net The videos of Peanut on there are very poor quality and very large files, so don't try them unless you are on a good high speed connection. They were done back before I got my good camera and learned how to change video file size. The fight video I put on here is not the best as we did not expect this to happen and I actually forgot that I had it running while trying to stop the fight, but managed to get some of it. ;)

:D I have eaten many rabbits in my day...and they are very good ;) . These little guys/gals are something else though. They are very affectionate and desire to be petted and scratched. They greet you almost like a dog when you come home too. Peanut has been with us for almost 18 months and has bonded to us. Domestic Rabbits typically bond for life (to another rabbit or their humans) so now that he is attached to us, he just will not accept another bunny. This is our 5th attempt at getting him a friend that he will accept and it just is not going to work so Cookie will be adopted out to a good home elsewhere soon. She was dumped in our back yard a couple months ago and we have worked hard and spent a fair amount of money to save her life as she had been treated very badly and nearly died. As you can see, she is healthy and strong now after a fairly major surgery and a few weeks recovery :cheers: .

We have had the Brown & White one (Peanut) for a little over a year now now, but we are fostering the Black & White one (Cookie) and hoping that they would get along and we could have two ... BUT ... I think this video says that it ain't gonna happen :laughin: :eek:

Be sure that when you press it back on, the outer edge of the pulley sleeve is flush with the end of the shaft. If it is off by 1/8", you will have terrible belt noise ... ask me how I learned that one :oops: ;) :cheers:

I now run the new Norton 360 Version 2.0 and it keeps my system pretty clean, but does not slow it down like all the other Norton products have been known for. I (and many others) highly recommend downloading this CCleaner utility. Spend a little time getting to know it and setting it up properly, and when run every now & then, it will keep all the junk out of your system that other things like Norton don't do.

Since you have the heads off, you can squirt the Marvel Mystery Oil around the pistons then do as Pete said as well. ;) I know Seafoam is good for cleaing, but I am not sure how good it is at lubricating/penetrating.

:eek: Dude... WTF... You need to be a little more sure of your situation before trying something like that :nuts: .

I have been through the same in other places. I am very proud to be a part of this Club and will do all I can to keep it the way it is. :cheers: Here's to ya Pete & Eagle ... and to all the folks here that make it great.

AHH the periles of the teenage driver. I have been through it too as I am sure many on here have. Sorry to hear of the misfortune :cry:

Saweeet!! I think I may have just finally figured out what I want to do about the flares on mine since no one seemed to like my idea of painting mine silver to match the bumpers and light bar ;) .

Rabbits are sugar junkies so that may explain your problem...they ate all your cookies... :chillin: Is everything working OK now?

My thoughts exactly...