Jump to content

Frankdm83

Members
 View Profile  See their activity

  • Posts

    134

  • Joined

  • Last visited

 Content Type 

Everything posted by Frankdm83

  1. Frankdm83
    Here are the Dorman/Help numbers for all the items Pressure Hose 624301 Return Hose 624300 Metal tube 624334 Fittings at Tranny 800714 I would replace all of them at the same time. Rock Auto has them all and are very competively priced
  2. Frankdm83
    IF you can get the rear slider out, take it
  3. Frankdm83
    I am going to go out and see if I can get the wiring for it this weekend before i try to wire them
  4. Frankdm83
    Thanks for the diagrams. Now to teach myslef how to red them and to wire it all in, lol
  5. Frankdm83
    Here is what I have Passenger door Drivers door And what they came from So all I need to do is wire them from the door in, all the wiring in the doors is there.
  6. Frankdm83
    I got a set of newer doors for my MJ, the only problem is they are full power and mine are all manual. I know the locks will not matter as the still have the manual slides, but how would I go about wiring the windows, or should I look for another set?
  7. Frankdm83
    Check with team cherokee.com too
  8. Frankdm83
    How do I easily take the nuetral safety switch off my AW4 tranny. I messed with one in the JY for half an hour and ended up breaking it
  9. Frankdm83
    The pressure line was leaking. The fittings from Rock Auto had everything. It ws the fitting that screwed in to the tranny, all the o rings and plastic pieces and the plastic clips. It is all back together and ready to roll.
  10. Frankdm83
    I hope they come with the fittings I ordered. It is leaking so bad now it takes a quart to go to work which is about 1.5 miles, or that the Jeep dealer here has them in stock
  11. Frankdm83
    so the 2 extra sets I have in the shed are worth some $$$?
  12. Frankdm83
    I heard that the rear flares from a 2 door XJ are the same as the ones for an MJ
  13. Frankdm83
    I just ordered them form Rock auto, now they need to get here quick
  14. Frankdm83
    Anyone know where I can get a kit that has all the o rings for the tranny cooler lines, I changed mine and am leaking more fluid out now then before I fixed it. Ineed the ones in the tranny.
  15. Frankdm83
    From reading the original post it seems as someone was selling their used track bar and stole a picture of a new one from Rustys website.
  16. Frankdm83
    When you did the front end conversion, did you change the inner fenders as wll or just leave them out?
  17. Frankdm83
    Does anyone have a pic of how where all the lines go, as mine are non-existant
  18. Frankdm83
    Website, number for ruffstuff?
  19. Frankdm83
    Here is what I am painting mine, Impact Orange
  20. Frankdm83
    Here is mine the day I bought it. This first upgrade: And it out doing its thing:
  21. Frankdm83
    Just pull the carrier and gears out of the rear and put them in your housing on the back. The front carrier will work with your axle but the gears will not if it is an LP axle.
  22. Frankdm83
    I have a set of 3.73 fronts if you want them
  23. Frankdm83
    I swapped mine out for the newer open style cooling system as i need a radiator at the same time. It was a fairly simple swap, just used a 92+ rad, heater control valve and a universal coolant tank.
  24. Frankdm83
    thanks know to buy more stuff for spring, lol
  25. Frankdm83
    So where can I get this amazing por-15. Is there a website for it?
×
×
  • Create New...