Frankdm83

IS that a cargo light i see on the back???

Scratch my back with a hacksaw!

A factory bumper is required for a u-haul hitch or any other hitch to work on an MJ. If you look at any towing companies product catalog there is a footnote that states "will fit with factory stp bumper only. I found this out when looking for mine as it has the weston replacement bumper on it.

Got mine yesterday! Thanks Pete!!!

I used my old harness. I just replaced the light sockets with newer style ones to fit.

No, Advance's house brand is Advance filters that are made by Fram, which suck!! So use a Purolator or Pure one

MAke sure u get the bracket for the roll bar. It is at the front of the bed, I believe it has 6 or so 15mm bolts holding it on

I am putting factory 97+ fog lights on my MJ as part of its front end upgrade. The truck does not have a fog light switch on it. Would it be harmful the splice into the low beam power wire for the fog lights so they go out when the hi beams come on, or is there another way i should wire it?

20 sounds good, lol

altoona here, almost right in the center of PA

I tried to find what I need on theier website but I can't seem to, guess I will have to call when I get the money up.

I am swapping my front axle to a non vacuum axle. I need to get a bearing kit for it since it will be apart. Can anyone sugeest one place or another to get it. I want all the differential bearings, axle seals, pinion bearings and seal and the crush ring, ring bolts and pinion nut.

The Irish finally get a win!!!!

Actually Advance owns CSK and Murrays, and I beloeve they do or are oin the process of buyinr Oreilleys

or check the front tag since they would be the same

Front, they are primered now, I was going to add some insurance to make sure I don;t have to mess with them again. The damn torx boltss are bad enough to deal with once, let alone twice

I want to put in on the inside of the fenders to prevent them from rusting. I should have been more clear.

I am putting new fenders on my MJ, do I just need to clean it and por 15 it, or do I still need to use the metal ready?

The window regulators are different for the 2 styles, the newer one won;t bolt up. I am swapping to newer doors. THe only hard thing is finding manual window parts. I am still looking for trim panels as the dealer here wants 300 a side

Put me in for a copy of Office Xp as well if possible

http://www.partsamerica.com/ProductList ... Tank+Strap

I would be in for a hat and some cozies

I have personally bought 4 lifts from Rustys and have never had a problem with anything. I would suggest the HD tracbar upgrade with the new mount, it eliminates the tie rod end design.

I have an extra gray one if you need it

I think I have 2 sets, not dure if they are complete, but I know I have the outer pieces. What all do you need and I can look and see what I have and get pics.