shark

Sure would be nice if the would actually produce that. With the proper drivetrain and suspension of course. This one's cool too.

Making progress... Cap, rotor and wires from Summit Racing. Accel coil.

Still workin'

I built a battery box to mount into the spare tire location. It uses the existing bolt holes.

Score! Brand new carpet from a guy on ebay. half price. maybe ill get it install it someday. new header. Junkyard score! Very nice tailgate. Replaced these...

My adult ADD took over and i decided to build a blasting cabinet to clean up the other under hood components.

Time to paint the engine compartment and the motor.

Got a new door. I need a driver's door if anyone has one local. I need a 97+ w/ power windows/lock and gray interior.

Fixing some rot under the hood.

I know its been a while since ive updated but that doesnt mean i havent been hard at work on this thing. This has turned into a bigger project than i thought it would be because i decided to tear everything down and restore or replace everything. Painting some Grizzly's I found on Craigslist. Prep

Count me in. Desert Tan Logo on Black medium T-shirt

Great info! Now, how much does each shaft weigh?

Not a chance.

a hairline in the head gasket will cause a lean condition in the closest cylinder to the crack. ask me how i know.

4.0 sb

like the title says, I'm in need of a '91 fuel pump and sender.

Thanks, Eagle!

are all short bed 18 gallon tanks the same?

where did you get the rear slider window? is it a new unit?

what size?

you should ask over at naxja. most guys over here havent done the dash swap.

I saw this. What a disgrace.

you could try to clean the ground to the fuel pump. its behind the driver's tail light. something simple to eliminate as a cause. also try another fuel pump. grab a used unit from a junk yard.

My wiring harness is in pretty bad shape due to a leaky clutch master. Do I need to make sure i get the new harness off another ax15 jeep or will any 4.0 harness of similar year work? or i might end up going obd2 so i can run a new style dash.

if your mj is a 4.0 the new 4.0 should bolt in with no problems. reuse all your current sensors. you might also need to relocate some of those sensors.