comanche12

:agree: on most of info from ^^^^ posts also my "advice" is put a real egg on gas pedal then drive around without break the egg :thumbsup:

:agree: edit: when your gonna get spacers for rear because of rear tires rubbing?

thanks but I'm still looking for full time job, the recently job that I got hired is more like side job. you can check it out http://www.autoshoponwheelz.com

got new sets of screws for my taillights and universal lamp for my license plate. :clapping: no more star (trox?) screws on my taillights! :banana: also just got offer letter in email that i got job! :banana:

thats make me want to change my radiator to open one and change the fans. Is it easy to change the radiator to open? what parts that I need to change? sorry for :hijack: tho.

That is a Miranda Class starship, and they usually don't have the lower wing. But there are different configurations for different sensor packages. Typically a science vessel, they can be out fitted with weapons packages as well. ah gotcha.

looks good! what color your gonna paint the gas tank? Black I bet.

it is a lunchbox locker just like aussie or lockrite so not quite as good as a true detroit but good enough :thumbsup: interesting haha lets see how it going after installed

never heard about spartan locker. is it good compare with detriot that I'm planning to get

Can't wait to see the process :cheers:

yuck :ack: good thing that you caught it :clapping: clean it up!

Looks good man! Never get tired of see this picture :thumbsup: I didn't means try to copy you. It's just because blur is my favorite color and black is my second favorite. So Ijust want to see how my mj look like with dark blue on black :brows:

thanks but actually more light paint it is more chance to hide the scratch compare to dark like my black subaru... :doh: plenty of scratch which is not my fault :nuts:

That's what I'm thinking . I like 500mj's but want little more dark like midnight blue or use jeep's factory color (cosmos blue) :brows: wait cosmo is seem too light too me. ill find more name of blue. I always love navy blue tho. edit: dark blue look perfect color as I prefer. :chillin: royal blue(similar to photoshopped blue in first post)

thanks man, thats what I want my MJ look like. whats not in this photoshop are 35" or 36" tires, rockslider, foglights on rollbars, different rear bumper with rear bottom quarter rockslider too.

I just finally used photoshop on my MJ. I just paint it and see what it look that i want to do in future with my MJ. what do you guys think? ] edit: now added bedliner :thumbsup:

ah thats make sense, i gotta do it asap, what should i replace to fix the leaking? I'm not expert with clutch master cylinder. also I just posted questions in your project about fuses. :thumbsup: I'm no expert either. check your master cylinder and see if there is fluid in it. if theres not you probably have a leak. what i did when i saw mine was dry is went to napa and got one for $30 and put it in myself, you just need 2 people for each side of the firewall installing new master cyl ah hm I just checked and still full(same amount when i refill after replace the bellhousing few months ago. so it should means that my clutch master cylinder is fine. (I hope) I'll try replace fuse block same time replace the climate control panel that PO trimmed the vents off. :doh: also will try replace clutch master anyway. I just like to make sure everything is ok since I'm picky :roll:

try check power supply to fuse. It same thing with mine few days ago then finally found there a open somewhere in power supply wire.

ah thats make sense, i gotta do it asap, what should i replace to fix the leaking? I'm not expert with clutch master cylinder. also I just posted questions in your project about fuses. :thumbsup:

that exact what I want to do with my fuse block.... where did you find those replace? looks so clean and new :thumbsup: btw: nice job on bedliner, look tough compare to mine with sissy red paint. :thumbsup:

that exact what I want to do with my fuse block.... where did you find those replace? looks so clean and new :thumbsup: btw: nice job on bedliner, look tough compare to mine with sissy red paint. :thumbsup:

I start noticed that there a lot of faulty power supply in my fuse panel. Also, I read somewhere threads about leak from the clutch master cylinder can cause damages to fuses. I don't see any leaks but there a lot of faulty electric problems. So whats brand should I get to replace the fuse panel? Get painless fuse kits?

sorry to bring this thread back from dead. gotta love zombies... haha anyway I just checked the ground and made new ground connect plus cleaned the taillight harness out and put new heatshrink. Connector look good and look like brand new inside the pin terminals. Now I just tested the turn signal switch and stop lamp. turn signal work but stop lamp is still not light up yet. even reverse lamp and hazard too. :dunno: those electric gremlin start pissing me off. :fs1: ---- I feel there something wrong with power supply to hazard and stop light because its come from same fuse. I checked the fuse, its fine also I replaced it an while ago. edit: I just applied the power to blue wire from brake pedal switch. stop lamp lighted up! :roll: so my gut is right that there open somewhere in power supply to fuse.

30 mins after ripped those old friction tape off and duct tapes... yes duct tapes. there couple some corrsion on wires and some damaged wires too. Ill replace some wires and fix the splices asap. duct tapes.... :doh: labeled wires up and taped the damaged wires and corrosion that I spotted.

pulled the taillight wiring harness to fix those PO's terrible splices and getting rid of electric tape. :no: Previous owner's splices and electric tapes