rylee144

What's a used mj light go for

It does not. The switch I have heard about is just the dash switch right?

Anyone have a photo of the cargo light and switch. What should I pay for one? Thanks

I only did the lowers and cleared 31s just fine.

That's a sweet looking truck. I like the gold wheels with the gold Pioneer

I've never really painted anything. If I use that wouldn't I still have to sand off the flaking paint and clear coat?

Now that the lift is done I am going to start saving for the 4x4 swap. I have a couple rusty spots and the clear cost is peeling everywhere. 1)Does this need to be addressed as soon as possible or is it fine for at least a year? 2)If I should get to it soon can I sand it down then spray it with black primer? Here are some photos of the areas i am concerned about and the peeling clear coat.

3 inches. I did not get a track bar. Someday i will get a beefier one.

Thanks again. It's all back together.

Should I get my truck realigned after the install is done?

Got it thanks guys.

From where to where?

I am installing my lift and needed to drop the trac bar to get my coil on. Now I can't get it back on. How do I pull it over to get the bolt through?

Their site doesn't give the dimensions. I'd like to know a little more of what size I'm buying.

I need to buy new U bolts for my Dana 35 rear leaf springs. I am adding a leaf and need to make sure I get bolts that are long enough. Grade 8, 1/2 in x 7 in x 2 3/4 is what I think I need. I found some that are 6 3/4in. Will these work or keep searching for 7in?

I bought a 3" rough country lift kit. For what I'll use the truck for this will work just fine. I can't spend alot of money on the truck with my second kiddo on the way. I'll continue to do stuff here and there. I hope the 4x4 swap and paint are next but itll prolly take a year to get there. The kit arrived today and I was able to get an hour in. The bolts are rusty and old on the rear springs, prolly never been removed so it took awhile to make progress. With my baby sleeping above the garage I wasn't able to use power tools which slowed me up a bit. Hope to get to it tomorrow.

Repainted my front bumper, grill, bezels and trim.

I couldn't find a short one and had to reroute a long cable to fit. Been working well for about a year.

That's what mine did and I had to replace the cable.

Q8 3LY AGJ Driver Assistance Group APA MONOTONE PAINT PACKAGE BCQ Battery - 750 Amp Maintenance Free CBA BENCH SEAT - STRAIGHT BK CGX Head Restraints-Outboard Seating, RR CKA CARPETS - CLASS I SHORT PILE 8 - 12 OZ DDJ 5SPD MANUAL TRANS A881 (JA-41) ERB ENGINE - 4.0L I6 MPI GAS GAC ALL WINDOWS - TINTED GLASS GEC Window - Left Side, Front, Sliding GFD SLIDING RR WINDOW GSC MIRROR - RIGHT BLACK HAA AIR CONDITIONING - FRONT JAY Instrument Cluster w/Tach JGB Clock - Digital JHA WINDSHIELD WIPERS - DELUXE JJA CIGAR LIGHTER - FRT COMP K60 BODY SIDE MOLDINGS - VINYL LAP FUEL ECONOMY SHIFT INDICATOR LIGHT LMA HALOGEN HEADLAMPS MBJ Bumper - Front, Black MDA FRT LICENSE PLATE ATTACH REQUIRED NAA ESA W/CATALYST (EXC CALIF SYSTEM) NHQ Transmission Heater NMB ENGINE COOLING - STANDARD DUTY PQ9 QQ9 RAF Radio - AM/FM Cassette SBA POWER STEERING SCE STRG WHL - EURO/SPORT TYPE SUA TILT STEERING COLUMN TBG SPARE TIRE - COMPACT WJN 15" Aluminum Wheels

https://seattle.craigslist.org/kit/pts/d/burley-jeep-comanche-mj-partout/6879469471.html this guy has one from a part out in seattle. he might ship it. its been on here for a bit. wants $100.

i this what your after ? https://www.ebay.com/p/Door-Check-Strap-Crown-55235571AB/229968517?iid=372015178517

Sheep Creek Falls in Northport WA. Family owned

Sorry to jump in. So only adjustable lowers are needed for a 3"? Or uppers and lowers? If a guy didnt want to shim.

Still need the mirror? I've got a line on one.