ejndssn

:hmm: that sounds like broken service to me

just replaced the wheel hubs bearing :banana: and rotors :jump: and ready for inspection and they where and what a pain after 22 yrs time for some and chill

Well i still have my first and i gotta her in 89 original owner gotta replace the wheel hubs on her and she is back on the road again :thumbsup:

just to let you know i have stroked my 4.0 to a 4.6 and don't have any cooling issues :brows: i do have a 3core radiator in it this may have some impact. now if i can find some time to drop the d44 in it and a small lift i call it good. you can go to the jeep strokers sitehttp://autos.groups.yahoo.com/group/strokers/ and see what they have done :idea: good luck

question on the stroker was there a reason you guys went with golen vice building one. btw great work :cheers:

hoo ya :cheers: congrats :clapping:

what did the internet say the spider bite was from, as for me i don't take likely to spider bites some are harmless based on the individual and some can hurt you :( and may do some mean damage :eek: . i would get the doctors and have them take a look at it and see what they have to say. hate for the flesh to be rotting away :rant: cause a lil pride got in the way. my previous boss would go to the doctor for any spider by now :brows:

for the home the only thing that sounds menacing then a shot gun chambering a round is the second shot gun doing the same told the wife always have backup and since they think that there are two loonies with a shot gun they just might kill them selves on the way out if we don't beat them to it :brows:

go to usajobs and see what they have to offer in the maryland area and may land you a gov'y job just a thought and if your boss is any good he will understand. No BS just the truth :cheers:

well here is an :idea: just get a few solar panels to provide you juice and get some electric blankets so that you have a heated floor under the jeep a layer of vinyl over the blanket in case of spills then cover the rest of the bottom open areas with a shower curtain and magnets to limit the cold air from getting under vehicle and the temp should rise to about workable conditions. All is needed is a few batteries, power inverter and some additional solar panels heck with the money gets good get wind power too :nuts: but it just might work :cheers:

the gear thing it always a very good idea as Pete stated :cheers: there are options for the 4.0l block and some of us have stroked the engine. :brows: if you are looking to get more HP/TQ you may want to consider :idea: this route. do the research and way your options.

Done may want to think about those hydraulic lifts for car storage :idea: then u and friends can parks double stacked :hmm:

:agree: i would Convert to MPFI 2.5L engine with a 5spd unless time is not on your side then i would go stock and upgrade to 5spd. :cheers:

that is not even twin turbo & supercharged let alone if they made this with a 24v :idea: . agreed :brows: with the with not going fast but some times there is a need for speed :brows: . my wife calls me at work while she is at home and said she needed to go to the doctors office :clapping: oh boy baby on the way :jump: i told her that i would be right there and hung up :hmm: and let me tell you what :fs2: my wife had just made it to the 2nd doctor's office she ask'd me how did i know she was here :headpop: i told her process of elimination :shake: and proceeded to explain to her that it was very dangerous for her in the state she was in to take any chances :doh: . i ask her to promise me :brows: that she calls the ambulance the next time. btw I had the needle peg on the way to each stop again i must have been very 8) on the outside but :fs1: on the inside. with this being said there is always place and a time :brows: just like the flats or track

:cheers: first thing welcome to the club i don't have an answer to your question since i never had to work on the 4 bangers and i am sure that one of the members here will pipe up and let us know :brows: you may want to post this question in the tech section and use the search to get you the answer. this may have been answered but i :dunno: good luck

i do agree with Mr. hornbrod i would do the research first. I have done mine with an AP kit and have been very pleased with it performance no complaints and no regrets FWIW http://cgi.ebay.com/ebaymotors/4.7-L-LITER-JEEP-STROKER-LONGBLOCK---AMC-READY-TO-GO!_W0QQitemZ400100244180QQcmdZViewItem?rvr_id=210332718858&adtype=pla here is one that might meet your buget and still have a lil extra. not sure what your :wrench: capabilities are you may want to go the kit route. just an :idea: thought btw made the next lvl :jump:

i would first post some pix of this truck :brows: then a location where this truck may be had or possible look see :brows: addition spec's of this machine just an :idea: and you could post it in the classified section. :cheers: good luck i'd get shot at if i bring 2nd truck home.

nice job :bowdown: !!! i could not do that around here the neighbor not zee's they would have a cow if the bed came off the truck :wall:

so when did you start to laugh and did you have your game face on when you called :rotf:

if ya talking bout the heater you maybe be able to source one from a jy :wrench: cheap or the local parts store for around 45 bucks plug and play or :wrench: :wrench: strip and replace after market if time is an issue try jy first if not then go to the local parts store :cheers:

i thought that you were refering to small soldiers :rotf:

it is all about greed, lazy and one not doing the right thing :headpop: we have to be the one to ensure that our bill is charge correctly for services rendered. i could go on and won't. :fs1:

2 each his/her own with this being stated everyone has different likes and dislikes i see this as a positive for our beloved mj and if this gets more companies interested in the MJ :brows: we may see competitive market for parts etc. :cheers: so for those folks that have a few mj could have a company sponsor or interest to do something which can have a mutal benefit :jump: just me on my fwiw

no i can take a guess could it be poor circulation to the hands based on how you sleep. :dunno: you may want to lookin into one of those sleep numbers beds just and :idea: :idea:

and don't forget to record the event :brows: so that it can be sent to America's funniest video :rotf: :rotfl2: