Jump to content

pug

Members
  • Posts

    495
  • Joined

  • Last visited

Everything posted by pug

  1. Yes gear has some wear don't know if it is within spec. If there is one were can you buy just the gear. thanks
  2. Pulled out distibutor no side to side play. There is play up and down. Is that normal.thanks
  3. Is there anyway to tell if it is the bearing or the gear. thanks
  4. Ok will do. Is it a bearing or is it a gear you are talking about. thanks
  5. Just checked there is a lot of play side to side on distributor shaft. Can i replace just the bearing or do i have to replace distributor. thanks
  6. Checked rotor wasnt bad replaced anyway. New plugs new cap and wires. Still has knock idels smooth at 650rpm. Is it something i have to worry about or let it go. thanks
  7. Will try tomorrow. Thanks
  8. What causes knocking sound at distibutor cap. thanks
  9. pug

    drip rail molding

    Ok thanks let me know price with s/h to 63462 perry mo
  10. pug

    drip rail molding

    Anyone have molding chrome or black . Need passengers side will buy both sides if don't want to split up. thanks
  11. pug

    e-trade baby

    E-Trade Baby Loses Everything. www.youtube.com
  12. pug

    drip rail molding

    Chrome would work also. thanks
  13. pug

    drip rail molding

    Would like to have black.thanks
  14. pug

    drip rail molding

    wtb drip rail molding for passenger side mj. Wll buy both if i have to. thanks
  15. pug

    beds

    I was thinking $200. and my bed. My bed has wheel well rust and dent on passenger side everything else is solid
  16. pug

    beds

    Whats a fair price to pay for a 6ft bed in good shape from the midwest. thanks
  17. Thats what i was looking for. thanks
  18. I have a set of 97+ bucket seats from a 4 door. Can i take the 97+ 2 door tilt brackets and put on the 4 door bucket seats. The 2 door seats are tore and have holes in them the 4 door seats are in great shape. thanks
  19. I don't have to worry about trade also is employee pricing any cheaper then factory invoice. thanks
  20. What is the differance in price between the two. I f msrp was $25000 what would factory invoice be. THANKS
  21. pug

    what price

    I can't return to stock with the longarm and wheels and tires. It would cost more to replace everything back to stock. I think 4 56 gears would be to low for a 235 75/15 tires. I was hoping to get 5000 on high side to 4000 on the low side. thanks
  22. pug

    what price

    I would rather sell it outright then trade it in at the dealer and get nothing for it.
  23. pug

    what price

    I wil try and get some pictures this weekend hre is a list of some of mods. 1998 xj 2 door 4.0 5 speed 133000. 8 inch long arm lift. 4 56 gears locker in 8 1/4 dana 30 up front. over the knuckle steering new 33. 10.50 15 km2 on outlaw2. New muffler and cat banks tourque tube cold air intake new clutch. body in good shape 2 little door dings stock bumpers. Inside just needs a headliner probably forgot som stuff. I went window shopping most of them just had 3-4 lifts with 31x10.50 tires i know i will never get what i have into it just want want to get a starting price thanks
  24. pug

    what price

    How do you figure what price your vehichle is worth when it is modified (lift tires gears). I know the pictures are not the best. thanks Image Not FoundImage Not FoundImage Not Found
  25. The slave cylinder is good. Went to top off clutch master cylinder the brake fluid is black is this normal. thanks
×
×
  • Create New...