54bobby

guys, i need the vacuume harness for my 87 2.5.

does anyone know what those melted wires are for?

does advance have them yet? what would it be listed under?

the links in my previous post have larger pics.

https://www.flickr.com/photos/100417966@N04/14035119037/ https://www.flickr.com/photos/100417966@N04/14035044490/ https://www.flickr.com/photos/100417966@N04/14198496066/ https://www.flickr.com/photos/100417966@N04/14034995979/ guys, here is the links to the picks, please take a look and let me know what i'm up against.

guys, my son took my renix 2.5 on a road trip and the down pipe to the manifold bolts came loose and the nuts dropped off. the pipe became disconnected and the heat melted the tubing that comes out of the tb and goes to the fitting in the rear of the vc also the tube that runs to the tb right next to it and runs along the fire wall an up towards the front of the engine compartment (not sure where). the truck is in a shop 250 miles from home. the vacuum harness is also damaged. the guy that has the truck is going to look start the work today and will call me with an update. is the vacume harness available for an 87 2.5? i'll try to get some pics and post them up later.

had it aligned when i installed the suspension parts. hit no large holes or curbs. could it be out already?

hey guys, when i go into a low speed turn, like pulling out of a driveway, the steering feels like it wants to turn further than i want it to then it backs off. it's like a back and forth feeling. in the past year i have put on new ti rods, track bar, steering stabilizer, and sway bar links. any ideas??

went to advance and bought a after market.

cmon guys. I need some info on a replacement mirror. it's the one in my avatar

I need a mirror for my 87 larado. flikr is not cooperating. it's the tow package mirror I think. can you guys help w/o a pic? I believe the same mirror was used on some broncos. drivers side is what I need but will take both if necessary.

guys, I broke off my drivers side mirror trying to adjust it. can't get flikr to cooperate to post pics but it's the tow package mirror. I think some broncos came with the same mirror. can u guys help? I will post in classifieds when I know which mirror I need.

I still get nothing. it will past into the dialog box if I open the link tab, but still won't post. grrr

guys, can someone please walk me through the process of copying a link to a post. I've done it before but must have a brain freeze. I copied the address bar on a cl add and hit the link tab on my post, then pasted address into the box but she won't paste. I can't even click on the ok box. please help.

no, on my first post I didn't know what was wrong. he then emailed me and told me. now my question is would this rig be worth 1200 if I can't talk him down a couple bucks?

the guy took the ring and pinion out to rebuild it but never did. he put her back together to use the truck. she is clean with tons of new parts ranging from fuel filter, pump ballast resistor, vc gasket 3" full rusty's lift, new cps and a full tune up. you think she is worth 1200? he does have the ring and pinion along with the front drive shaft. she is a 4.0 manual. can't copy cl listing for some reason. if on of you guys could go to south jersey craigs list she is there in the Bridgton area listed at 1200. no pic but he sent me one and I can't post that up either.

guys, I am going to look at a 90 xj that is advertised as being well sorted but the 4x4 isn't working. does this year use the cad system? the price is right if it's not the t-case that is the problem.

you can wear out anything with a lack of clean oil.

by a locker, you mean a LSD diff correct? I don't think he does but i'll find out.

guys, a friend has a YJ and it's making a clunking sound in the rear when he goes into either a right or left turn??????????????? any ideas?? it's a 2.5 manual, 1994

horn started working again. that leads me to believe that it's a contact problem in the button. am I correct in assuming that?

I just installed 52003040 on mine and what a difference. I did however have a brand new exhaust system to bolt it up to.

so, who's got an oem horn for sale shipped to 08260?

guys, whats all this (high tone/low tone, 1 wire/2 wire) stuff about horns? I need a new horn for my 87 2.5. what am I looking for, for the replacement?

part it out and fire up another one.