Wrz

Sounds great does he need a deposit or full payment? If not how can I reserve a set Thanks

Put me down om s pair of the 3/2 leafs, any idea on the price of shipping?

I'd have to say at least 10k

http://cgi.ebay.com/ebaymotors/1991-Jeep-Comanche-Pioneer-Metric-Ton-Dana44-4-0L-4WD-A-T-013-342-Miles-CA-Car-/221176773919?pt=US_Cars_Trucks&hash=item337f29bd1f#ht_500wt_1064

I know how hard the diesel parts are to find for these trucks Here's a rare find http://www.ebay.com/itm/Jeep-Cherokee-Comanche-2-1-J8S-Renault-turbo-Diesel-head-timing-belt-Winnabago-/200870381917?pt=Motors_Car_Truck_Parts_Accessories&hash=item2ec4cec95d&vxp=mtr

Not sure, I would buy it but I have way too many parts for my 4.0 already Great deal for the price

http://www.ebay.com/itm/85-94-Jeep-Cherokee-Turbo-Diesel-Engine-Renault-2-1-J8S-/181047521990?hash=item2a2745f2c6&item=181047521990&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr

Hah that's funny, Comanches are scarce around here, is that overload spring stock? Thanks

I bought the jeep like that, does not appreared to be lifted. But would like to correct it or get a replacement pair Any ideas why it's shaped like that?

Made some small progress on the manche today, Got the frame and under carriage all pressure washed, still have a few more spots to hit i missed In the process No rott, Just som minor surface rust and flakey unde coating Tomarrow i have some grinding, sanding and some prep work before the monstaline goes on ;)

I have two if your interested send me a message Thanms

Made some good progress on the MJ today spotted this little jem at my work and will be working on the price with the boss, will hopefully have it at the house this weekend comming up no rott or rust anywhere just a dent on the lower rear corner Sold the rims/tires and front brush guard the manche came with for $160 The first 3 came off like butter, the 4th was stripped and would not come out. ending up drilling the studs to get it off will be replacing with zj studs since i will be doing discs in the rear at some point Got the bed off :) what a pitta lifting by yourself Some 5.9 zj rims i tossed on, had left over from a part out, will use for rollers Little present from the PO Happy to say the frame is rott free with some flakey undercoating and minor surface rust Misc picture of the load sesing valve, will be eliminating when i redo the brakes Do these leafs look correct? seem kinda funny with banna shape they have made some more progress on the passenger side floor, alot of rust but no holes bigger then a skittle lol Bed removal was pretty straight foward, with no broken bolts ( soaked them all in crc freeze off for two days ) Gas tank had new hardward which was great and made it easy and even came with a little over a quarter tank :) Making some progress and will hopefully have her in the garage so i can work on it at night after work next weekend i will get the frame and under carriage pressure washed, and weather permitting get the monstaline rolled on :banana: Previous total - $1525 Parts sold- $160 Cost to date- $1365

Made some small progress on the mj swapped the doors from a 99 cherrokee ( still need the door strickers ) The Donor Doors Before After Another after pic, Must of delete the before pic :doh: Still have to line up the body lines, and wire everything up but is comming along slowly This weekend i will finish up sanding up he passengerside floor Monstaline the interior and start on fixing and doing the wiring Anyone have a good write up on column to floo shift? The tranny is being refreshed this week and i would like to do this swap before the carpet goes in Doors- Free from work :thumbsup: Cost to date - $1525 Will add in the other parts i have as i install them

Sweeet

No problem, I work at a jy so it's only a matter of time before one rolls in lol

I know but what comanche does not need some tlc......figures all these start to pop up after I bought mine that Needs a lot of work lol

Ill keep an eye out for another set if i come across them for ya, won them with 4seconds left :)

2x. There's a real funky looking one on eBay in Florida.

http://cgi.ebay.com/ebaymotors/1989-Jeep-Comanche-4X4-Truck-Pickup-4x4-4WD-NO-RESERVE-/121024250730?pt=US_Cars_Trucks&hash=item1c2d9b836a#ht_500wt_1021

How's everyone doing, I'm new to this forum and finally bought a comanche after searching for a few months. I've owned a few zj's and have a xj as a dd currently. I have high hopes for this build and we shall see where it takes me, can't say I have a budget since its a JEEP Bought it from a member here on CC for $900 and got beat up on the shipping costing me a total of $1525 to my door. Needs a trans seal to get it running ( trans in bed ) Specs 1990 comanche pioneer lwb 174k auto 4x4 355 gears Solid frame Newer engine with 85k Roll bar Needs rockers and some body work Here are some pics My xj in the background Took the bench seat carpet and some trim out What a pitta the lower seat belt bolts are Mostly surface but has a couple poke through spots on the drivers side Passengers side mostly surface and nothing too major Comanhe- $900 Shipping- $625 Cost to date- $1525

Send me a message if will to sell and ship the brackets to 11960 thanks

2x have them on my watch list