70barracuda Posted Sunday at 02:28 AM Share Posted Sunday at 02:28 AM Anyone know if the 86-90 ignition lock cylinders work in a 91+ column? Bought a "new" tilt column and it's a 91+ with chrysler keys. I would like to use my original GM key if I can. Link to comment Share on other sites More sharing options...
pizzaman09 Posted Sunday at 04:07 PM Share Posted Sunday at 04:07 PM I don't know but it sounds like you have the parts at hand to find out for us! 😜 I kind of doubt it will be plug and play. Link to comment Share on other sites More sharing options...
GonzoTheGreat Posted Sunday at 11:45 PM Share Posted Sunday at 11:45 PM If memory serves, it’s a no. It has to with how it’s held into the column. The early cylinder uses a bolt to retain it, while the later cylinder uses a spring tab, which is not present on the early cylinder. I was able to make a 91+ cylinder fit into an ‘89 column by grinding a notch into the cylinder where the retainer bolt goes, and removing the spring tab. But I don’t think you could add the spring tab to the early cylinder to go the other way. You can see the slot on the far right of the Chrysler cylinder, that’s where the tab was. Link to comment Share on other sites More sharing options...
eaglescout526 Posted Sunday at 11:55 PM Share Posted Sunday at 11:55 PM 8 minutes ago, GonzoTheGreat said: If memory serves, it’s a no. It has to with how it’s held into the column. The early cylinder uses a bolt to retain it, while the later cylinder uses a spring tab, which is not present on the early cylinder. I was able to make a 91+ cylinder fit into an ‘89 column by grinding a notch into the cylinder where the retainer bolt goes, and removing the spring tab. But I don’t think you could add the spring tab to the early cylinder to go the other way. You can see the slot on the far right of the Chrysler cylinder, that’s where the tab was. This reminds me of my 84 where it doesn’t have the bolt to keep it in place but it has a spring tab on the lock to keep it in place. Link to comment Share on other sites More sharing options...
jpnjake Posted 23 hours ago Share Posted 23 hours ago My Dad did this swap last night on the 91' XJ, he had both early, and late lock cylinders. Before (Chrysler key) : . After (GM/AMC Key) : Lock Cylinder he removed: He was surprised the 91' column took the early lock cylinder (WellsA08004) Link to comment Share on other sites More sharing options...
70barracuda Posted 6 hours ago Author Share Posted 6 hours ago Do the 91+ door lock cylinders fit without much work? I was thinking about it and one key would be kind of nicer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now