Jump to content

Jeep Parts AZ


eaglescout526
 Share

Recommended Posts

Starting a new thread for the parts I have that are engine and exterior related. 

 

I am trying something new, I have some wires that I do not need that are complete and not cut up. Wires came from a 4.0L engine harness at C104 and C105 and C103. I can add more if there is an interest in just separate wires. All wires are $5 unless otherwise above the pic of the wire itself.

 

Prices are listed and OBO

 

Short bed plastic skid plate $70. EDIT!!, Strap has been removed from skid!!

IMG_8602.jpg.96a66fe94e75cdbd97691c6bf8f70690.jpg

 

Chiltons Manuals. $20

IMG_8770.jpg.c9686d46382af78fce726a001a3fa87c.jpg

IMG_8769.jpg.2e776cfc80ec3a31fcf0b594f9d7d0e6.jpg

 

Aftermarket Dorman HO thermostat housings. $25 each. Got them from AMC before the closed down. I can’t use them, i don't have an HO.

IMG_1480.jpg.aa1c1a9175d380ae71e0c48c1d74fd52.jpgIMG_1481.jpg.52e7e46b145c87de32e3f4152a27c472.jpg

 

4.0L Coolant Bottle strap, 2 on hand. $10

IMG_1483.jpg.edfd26d5685005b87d2f23cb807541e1.jpg

 

Black Renix upper and lower metal grill trim. The upper portion is a bit bent and rusted but I couldn’t just let it sit and get crushed. $100 for the set.

DA88E959-C3FF-443E-8955-62C7F7587A02.jpeg.b4271109c7493282b3454649d76b14a5.jpeg.24efb2a6ce1bbca9d8ca5794da88f560.jpeg

 

Exterior aftermarket plastic door handles. $10 ea. one passenger and two drivers. All are unused except for one driver was used to just get in and out of my truck when it was being painted. 

 

Drivers

IMG_0123.jpg.8ac76d385795e9791eebd71fc0e93903.jpg

IMG_0122.jpg.7c6588bf4904a2f9995c63b3a9aaef91.jpg

 

Pass

IMG_0115.jpg.3a95e69329bf1d4e41c42de353f617da.jpg

 

EGR Solenoid 8933002298 or 33002298, $20. 3 in stock

IMG_1485.jpg.940c68ffb55adc6d4fcfe0ab59e4dc74.jpg

 

Aftermarket Pass side hood hinge, new in package. $25

IMG_1493.jpg.d17ee4c142ddbc09675be33692e66bf2.jpg

 

NOS Front end cover for 97-01 front ends. $150, missing the top cover for the hood itself.

I found a company on eBay making the hood cover. That’s an option to go with this. 

IMG_1495.jpg.fe1b3616f74aa0a08d4520a84e184474.jpg

 

Drivers side factory bumper step pad $40

IMG_1496.jpg.a64dc64abc4ced592df360782dcc46e0.jpgIMG_1497.jpg.ee7f2425a7db6ba5145fc17bc6091252.jpg

 

Pass side factory bumper step pad $40

IMG_0972.jpg.fa9fdd10771c90c3a7eef7742e720b8f.jpgIMG_0974.jpg.cb11a29f766c8dc874862d53e2ad3380.jpg

 

J4006546-these are the clips that keep the power window and door lock switches in the bezel of the door handle. $3 a piece, I think I have 12 of them.

IMG_1725.jpg.49a0f26272b80d643ec2537f8f21bc6e.jpg

IMG_1726.jpg.fb2cc2305244dd03156fa6bc301d28c6.jpg

 

NOS Knock sensor for the 4.0L Renix. I know it looks different than the original sensor but there is an instruction paper in the bag talking about the change and what needs to be done. $70

IMG_1727.jpg.4bd12018f3780a38ff6b8989a48032c3.jpg

IMG_1728.jpg.1421b955824ab3674ae0576f2a01d450.jpg

 

Sentinel headlamp/headlamp delay module, no screw, out of them, 8956000636. $20

IMG_1729.jpg.2c85ffac957119111098cf3a2988e3ed.jpg
 

NOS Passenger side folding 2-door XJ and MJ seat frame. $200, free shipping on this.

IMG_2260.jpg

IMG_2261.jpg

 

 

Wiring section:

Command-trac wire. C104-C100 

IMG_2254.jpg

 

Selec-trac wire. C104-C100

IMG_2256.jpg

 

EGR, C217-C109. $7 cause it still has the connector. I will clean it.

IMG_2263.jpg

 

Sync supply wire. C104-C105. $2

IMG_2259.jpg

 

Back up lamp switch. C104-C100

IMG_2257.jpg

 

Temp sensor for cluster. C104-C100

IMG_2255.jpg

 

Up shift lamp. C104-C100

IMG_2258.jpg

 

Alt to cluster. C105-C100

IMG_2262.jpg

 

Off road lamps

First set, Not pictured but it is a set of two, complete, wiring is a bit butchered but all there. $100

IMG_1445.jpg

IMG_1439.jpg

 

Second set, Bosch lamps, era correct for the 90's XJs but will look just as correct on the MJ. No bulbs and they ground out via the housing. $200obo

IMG_1453.jpg

IMG_1454.jpg

 

Fog lamp clip/mounts $10

IMG_2808.jpg

 

Underhood lamp #1 $100. Works!

IMG_9893.jpg

 

Underhood lamp #2 $90. Bulb not included unless I can find it. Also works!

IMG_9894.jpg

 

Renix fuel pump ballast resistors. Original AMC resistors. They Ωhm out to spec. $10

IMG_2842.jpg

 

Charcoal tilt column housing. $30 Needs some love but in great shape

IMG_3161.jpg

IMG_3162.jpg

IMG_3163.jpg

 

Rear window molding #1 In good shape, has some fade from being in the sun. $150

IMG_3159.jpg

 

Rear window molding #2. Same issue as #1 with a bit more fading and needing to sit in the sun to go back to shape properly. $150

IMG_3160.jpg

 

HO era oil filters. Brand new. Tried to test fit one on my MJ, its the 3/4" fitting. I have 3 for $5ea

IMG_3232.jpg

IMG_3233.jpg

 

Link to comment
Share on other sites

  • 1 month later...
  • 5 months later...
  • 3 weeks later...

Do you have the bench seat belts in the color charcoal gray? Not the parts that are attached to the B pillars, but the parts that come through the seat. See pic.

 

 

Bench Seat Belt Pair Charcoal Gray.jpg

Link to comment
Share on other sites

19 minutes ago, robfg67 said:

Do you have the bench seat belts in the color charcoal gray? Not the parts that are attached to the B pillars, but the parts that come through the seat. See pic.

 

 

Bench Seat Belt Pair Charcoal Gray.jpg


I might! I’ll have to do some digging for ya and get back to ya. 

Link to comment
Share on other sites

  • 1 month later...
 Share

×
×
  • Create New...