rejeep Posted April 4, 2006 Posted April 4, 2006 I have a LWB 86 MJ with the I4 For registration I need the Light and Gross weight I tried google and the forum, but didnt come up with much.. any help before 2pm tomorrow when I hit the DMV ..... again
rejeep Posted April 4, 2006 Author Posted April 4, 2006 I checked in the Jeep, but don't they usually have it on the driver side door? I coulnt find it.
GirsMJ86 Posted April 4, 2006 Posted April 4, 2006 well mine doesnt say it on the door but its so worn off its hard to tell if it was ever there. what i said b4 came straight from my owners manual. alex
rejeep Posted April 4, 2006 Author Posted April 4, 2006 what i said b4 came straight from my owners manual.alex my MJ doesnt even have a floor right now, let alone a manual.. :lol: :wink:
GirsMJ86 Posted April 4, 2006 Posted April 4, 2006 ooo that sucks. hope ya get it back together ok. and umm without the floor you might want to subtract some of the weight from the manual. :lol: alex
ROADLESS Posted April 4, 2006 Posted April 4, 2006 The only # i was able to find is the base weight of 2955 lbs. (according to msn_auto) don't know how reliable that # is though.
rejeep Posted April 4, 2006 Author Posted April 4, 2006 CW... I know your registered in CT also.. what did you put down for the light and gross weight?
Oizarod115 Posted April 6, 2006 Posted April 6, 2006 does anyone know the weight of a 89 SWB 4x4 i6? as someone mentioned... the door plate is so worn off on it i can't read a word it says.
Oizarod115 Posted April 6, 2006 Posted April 6, 2006 nevermind that last post, i searched naxja there was a whole thread on it. the most commonly agreed on weight was 3200-3600 depending on gas, spares, people, and such. here's the thread link... http://www.naxja.org/forum/showthread.p ... urb+weight
commando14 Posted April 6, 2006 Posted April 6, 2006 MSN Autos is a good site to check for basic information like weight, horsepower, wheelbase, etc.. They don't always have all the information but it's still worth it to check out sometimes: http://autos.msn.com/research/vip/spec_ ... &trimid=-1
Pete M Posted April 6, 2006 Posted April 6, 2006 4x2 sb curb weight: 2912, GVWR: 4387 4x4 sb curb weight: 3076, GVWR: 4551 4x2 lb curb weight: 2959, GVWR: 4434 4x4 lb curb weight: 3141, GVWR: 4616 Jeep on! --Pete
Eagle Posted April 7, 2006 Posted April 7, 2006 Pete, what year were those numbers for? I know I got the number I quoted directly from an '86 Owners manual, and it doesn't match any of your numbers.
Skidd3R Posted April 7, 2006 Posted April 7, 2006 search you vin on a vin decoder. It will tell you the manufactures GVWR. for your build model.
Skidd3R Posted April 7, 2006 Posted April 7, 2006 here is a link to a vin decoder: https://www.agedstock.com/main/vin.php
Pete M Posted April 8, 2006 Posted April 8, 2006 All the numbers were from my 88 dealership brochure. I've never been able to figure out why the GVWR in my 86 brochure shows as slightly higher than in 88, but the payload rating was actually less (1200 compared to 1475). I gotta imagine that you merely need to be in the ballpark. Metric tonne lb 2x4 curb weight: 2959; GVWR: 5165 Metric tonne lb 4x4 curb weight: 3141; GVWR: 5347 GVWR from my 86 brochure (all longbeds of course), no curb weight given: 2x4: 4554 4x4: 4779 Metric tonne 2x4: 5208 Metric tonne 4x4: 5375 Oh, and every single number is for a 2.5L engine. Jeep on! --Pete
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now