No low beams

[70barracuda]

Lost low beams out of nowhere. Other morning I turned on headlights, and had no lows. Clicked to high and worked fine, then back and lows worked. Noticed the relay for lows was wet inside and changed it. Now I can't get them back again. Highs worked perfectly fine.  I have power to the dimmer switch. Swapped with a brand new one and same thing. I have no low beam voltage out of the headlight sockets. I'm a little stumped. 

[Pete M]

do you have power at the relay?

[Ωhm]

 

Photo @Monte721

 

 

 

Check C102 connector for front lighting issues.

[70barracuda]

11 minutes ago, Pete M said:

do you have power at the relay?

No I don't. It's got an aftermarket harness but nothing up to the harness. It gets lost after the dimmer switch 

1 minute ago, Ωhm said:

 

Photo @Monte721

 

 

 

Check C102 connector for front lighting issues.

Hmm I just recently had that one apart and cleaned. Maybe it got slightly unplugged or I didn't do a good enough job. 

[Ωhm]

Low Beams C102_7.

 

 

[Pete M]

is the dimmer switch clicking each time? (the actual switch not the handle)  I've had mine come loose from the column and not properly engaging. 

[70barracuda]

8 minutes ago, Pete M said:

is the dimmer switch clicking each time? (the actual switch not the handle)  I've had mine come loose from the column and not properly engaging. 

Yeah it's definitely clicking. I took the new one and clicked it by hand so it's definitely switching over. It goes in and out of highs no problem. 

[jdog]

 Swapped relays between high and low? Checked ground for relays?

[70barracuda]

43 minutes ago, jdog said:

 Swapped relays between high and low? Checked ground for relays?

Swapped relays and still only highs. I can't remember if I checked the ground, that'll be a tomorrow check. 

[70barracuda]

Been raining for 5 days straight. Finally got to take a look. I have power up to the harness relay. Haven't tracked down a broken wire but I wasn't able to get to all of it yet. It's kind of a cheaper harness so I'm just gonna make my own with new relays and wiring.