Warren99 Posted November 27, 2021 Share Posted November 27, 2021 Found a 4wd 89 XJ at the junkyard. It’s a limited, so has power Windows, power seats, and a tilt column with cruise control. Can I take the cruise control stuff and column and swap it over to mine without needing to replace the whole harness? My MJ is the same year, but is a base model. Link to comment Share on other sites More sharing options...
Warren99 Posted November 27, 2021 Author Share Posted November 27, 2021 I have a lot of pictures, just can’t send atm Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 27, 2021 Share Posted November 27, 2021 You can absolutely take everything except the column, you don't need the column but you need the turn signal stalk from it. Other wise everything comes out and is completely separate from the main harness. Link to comment Share on other sites More sharing options...
Warren99 Posted November 28, 2021 Author Share Posted November 28, 2021 Ok, was worried about harness bc of the mess of wires under the cruise control vacuum motor thing on the firewall. Also, what about the column. I want the whole thing just bc of the tilt part, that shouldn't introduce any complicated new wire harnesses right? And lastly the plastic linkage stuff attached to the turn signal stalk was broken, someone took the steering wheel off and gave up after bending the metal plate. You can see the broken plastic inside incase the free moving stalk wasn't clear enough. Do I need to find that white plastic linkage from another renix cruise control or is that the same for every turn signal. Sorry if my questions aren't clear I hope the pictures help. Link to comment Share on other sites More sharing options...
Warren99 Posted November 28, 2021 Author Share Posted November 28, 2021 Last two pics show the mess of wires I was talking about. Does the one plug under the CC Motor actually go into it or is that just going past it, I didn't check. Link to comment Share on other sites More sharing options...
fiatslug87 Posted November 28, 2021 Share Posted November 28, 2021 Just for information, the ignition switch is different between tilt and fixed columns, but that is attached to the column anyways. Link to comment Share on other sites More sharing options...
Warren99 Posted November 28, 2021 Author Share Posted November 28, 2021 Ok, also since its a gm column, do any parts carry over from any gm trucks? Like maybe the turn signal linkage stuff Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 28, 2021 Share Posted November 28, 2021 So there’s two vac ports and one wire plug for the solenoid. One goes into the harness into the cab attached to a brake switch above the brake pedal, grab the bracket and the other vac port goes to the reservoir behind the bumper. So you’ll need to grab ever little piece attached to it. I have spare parts for cruise control as well. Link to comment Share on other sites More sharing options...
Warren99 Posted November 28, 2021 Author Share Posted November 28, 2021 alright thanks I'll update when I go back Link to comment Share on other sites More sharing options...
Tex06 Posted December 2, 2021 Share Posted December 2, 2021 On 11/27/2021 at 8:46 PM, Warren99 said: Ok, also since its a gm column, do any parts carry over from any gm trucks? Like maybe the turn signal linkage stuff Yup. It's all GM inside and a lot of the pieces interchange. I have a '92 and I used an '80s GM turn signal stalk for my cruise swap. Where in Atlanta are ya? I just moved back to the area Link to comment Share on other sites More sharing options...
JMO413 Posted December 2, 2021 Share Posted December 2, 2021 On 11/27/2021 at 7:46 PM, Warren99 said: Ok, also since its a gm column, do any parts carry over from any gm trucks? Like maybe the turn signal linkage stuff Yeah it's just a Saginaw column. I have used some S10 parts. Link to comment Share on other sites More sharing options...
Warren99 Posted December 5, 2021 Author Share Posted December 5, 2021 Ok great I'll probably just get it and look for an s10 or something for the linkage. On 12/2/2021 at 5:21 PM, Tex06 said: Yup. It's all GM inside and a lot of the pieces interchange. I have a '92 and I used an '80s GM turn signal stalk for my cruise swap. Where in Atlanta are ya? I just moved back to the area About 30 minutes Southeast of Atl Link to comment Share on other sites More sharing options...
Warren99 Posted December 23, 2021 Author Share Posted December 23, 2021 Ok I went and got the column, as well as the vacuum motor, the wire harness that runs to that, the bigger vacuum resevoir and its hoses, the throttle cables and the speedo cable bc it had a wire and censor going to it. The whole ecu was gone, but I found a yellow amc box just laying in the passenger floor. Sure enough it lines up with one of the connectors, and a quick search of the part number brings up an ebay listing for one calling it a cruise control box. So I'm glad I found that, hoping the rain water from the missing sunroof didnt kill it. Link to comment Share on other sites More sharing options...
Warren99 Posted December 23, 2021 Author Share Posted December 23, 2021 Also, this was out of a limited trim, which had power windows and power seats. The seats were in pretty rough condition but I've never seen any that looked like these, are they in any way rare or hard to come by? Link to comment Share on other sites More sharing options...
eaglescout526 Posted December 23, 2021 Share Posted December 23, 2021 I have a metric ton of those regulators(yellow AMC box). Very rarely do they fail or not work but if it has been exposed to moisture for years, expect there to be some corrosion as it is not perfectly sealed. Fun fact, Dana, the axle makers had a division that used to make all those cruise control kits. AMC got the exclusive contract for those kits to be more factory and professional than what you would get from say Sears or the other big 3 makers. Link to comment Share on other sites More sharing options...
Warren99 Posted December 23, 2021 Author Share Posted December 23, 2021 Oh cool, it just occurred to me tho that mine is a manual and the cherokee was an automatic. So should everything still work? Reminder that it was the same exact year as mine. Link to comment Share on other sites More sharing options...
eaglescout526 Posted December 23, 2021 Share Posted December 23, 2021 The only major difference between the two set ups is that the manual trans has a switch that sits above the pedal and disengages cruise for shifting. But it’s better to have the automatic set up as it’s harder to find the original clutch switch. You’ll just have to remember when you have cruise engaged to not shift unless you tap the brakes to turn off cruise. Otherwise it’s plug n play. Link to comment Share on other sites More sharing options...
Warren99 Posted December 23, 2021 Author Share Posted December 23, 2021 ok sweet thank you Link to comment Share on other sites More sharing options...
Warren99 Posted December 28, 2021 Author Share Posted December 28, 2021 Yeah so the idiot who tried getting the column taken apart with force before giving up at the junkyard damaged too many parts. There were too many internal parts broken and I don't have any on hand already so I returned the column for in store credit at the junkyard. I kept the rest of the cruise control parts though. I just need to find a cruise control column for the 3 spoke wheel. Any year from a gm column in a cherokee should work right? Link to comment Share on other sites More sharing options...
eaglescout526 Posted December 28, 2021 Share Posted December 28, 2021 You could always install cruise with your current column. Just the only thing that you may or may not have is the intermittent wipers which is the only thing the cruise control controls were on. Are you looking to add intermittent wipers as well? Otherwise there is no real difference in a column with cruise vs without cruise. Link to comment Share on other sites More sharing options...
Warren99 Posted December 29, 2021 Author Share Posted December 29, 2021 The intermittent wipers would be nice, and so would having a tilt column. I'll just wait til I find a completely or mostly complete column, I'm not in a hurry Link to comment Share on other sites More sharing options...
.thumb.jpg.00f6632c078db322a1ff1364dda7d8c7.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now