CGCWO Posted July 9, 2021 Share Posted July 9, 2021 Pair of bed rails $50 plus shipping. These were on a short bed with a tool box, overall length is 47 inches. Not perfect but could be rechromed or powder coated. Link to comment Share on other sites More sharing options...
Top C Posted July 10, 2021 Share Posted July 10, 2021 Where do these fit on the MJ? I have a shout bed MJ and might interested in them. Mike Link to comment Share on other sites More sharing options...
fiatslug87 Posted July 10, 2021 Share Posted July 10, 2021 On top of the bed rails. Link to comment Share on other sites More sharing options...
Pete M Posted July 10, 2021 Share Posted July 10, 2021 3 hours ago, Top C said: Where do these fit on the MJ? I have a shout bed MJ and might interested in them. Mike just in case you didn't notice, it would appear the ones for sale have been shortened to fit an over-the-rail tool box. one length of bar is shorter than the other. but I imagine that they can be replaced with some appropriate metal stock bar. it's those brackets that are teh most important bit. Link to comment Share on other sites More sharing options...
fiatslug87 Posted July 10, 2021 Share Posted July 10, 2021 Just so you know, the bars have a trapezoidal cross section as do the brackets where the bars slip over them. And you should put some gasket material between the bed and brackets, OEM was black plastic. Link to comment Share on other sites More sharing options...
eaglescout526 Posted July 10, 2021 Share Posted July 10, 2021 13 minutes ago, fiatslug87 said: Just so you know, the bars have a trapezoidal cross section as do the brackets where the bars slip over them. And you should put some gasket material between the bed and brackets, OEM was black plastic. Wait, you can still get these things?! Link to comment Share on other sites More sharing options...
fiatslug87 Posted July 10, 2021 Share Posted July 10, 2021 2 hours ago, eaglescout526 said: Wait, you can still get these things?! Yes, from McMaster-Carr I found this NOS set a few years ago on eBay, didn't have the hardware so I got that from McMaster-Carr, I went for stainless security Torx. Sorry Link to comment Share on other sites More sharing options...
Pete M Posted July 10, 2021 Share Posted July 10, 2021 2 hours ago, fiatslug87 said: Just so you know, the bars have a trapezoidal cross section as do the brackets where the bars slip over them. awww.... Link to comment Share on other sites More sharing options...
CGCWO Posted July 11, 2021 Author Share Posted July 11, 2021 Bump still available. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.