CGCWO Posted February 11, 2021 Share Posted February 11, 2021 Still learning and discovered this connector coming off the transfer case (1987 Comanche Pioneer 4x4 Auto). Does anyone know why they are for/go to? One wire is black/red the other is lime/yellow and grey. I can’t find a open female end anywhere with in reach of them. Link to comment Share on other sites More sharing options...
87MJTIM Posted February 11, 2021 Share Posted February 11, 2021 Reverse light connector Link to comment Share on other sites More sharing options...
88mancheman Posted February 11, 2021 Share Posted February 11, 2021 Looks to be the wires for the 4WD indicator switch, the switch itself is usually on the driver side of the tcase on the top of the unit on the planetary section of the case (kind of above the front driveshaft on the part that attaches to the transmission if that makes sense) Link to comment Share on other sites More sharing options...
CGCWO Posted February 11, 2021 Author Share Posted February 11, 2021 That makes sense, but I can’t find the female end it should connect to. Re-read your post and I’ll have to see if I can find the connector on the transmission Link to comment Share on other sites More sharing options...
CGCWO Posted February 11, 2021 Author Share Posted February 11, 2021 20 minutes ago, 87MJTIM said: Reverse light connector Not reverse light switch. Backup lights work as they should. Link to comment Share on other sites More sharing options...
Parker Posted February 11, 2021 Share Posted February 11, 2021 24 minutes ago, 88mancheman said: Looks to be the wires for the 4WD indicator switch, the switch itself is usually on the driver side of the tcase on the top of the unit on the planetary section of the case (kind of above the front driveshaft on the part that attaches to the transmission if that makes sense) Thinking the same thing. Link to comment Share on other sites More sharing options...
CGCWO Posted February 11, 2021 Author Share Posted February 11, 2021 1 hour ago, Parker said: Thinking the same thing. Some more digging and looking this wire is plugged into a connector on the transfer case/trans. It seems like it’s a jumper to go from the trans/transfer case to some where in the wiring harness. It’s just over a foot long and has male plugs on both ends. That’s the connection I can’t find, thank for all your help and insight so far! Link to comment Share on other sites More sharing options...
Ωhm Posted February 11, 2021 Share Posted February 11, 2021 Any swap history here? 2wd/4wd. Auto/manual. Maybe both. Link to comment Share on other sites More sharing options...
CGCWO Posted February 12, 2021 Author Share Posted February 12, 2021 Nothing that I am aware of, but you never know. VIN is registered and I believe it showed 4x4 auto from factory. I guess it could be a swap trans/transfer case. There has definitely been some work done as the trans lines are all re-routed or either not mounted as they should be from factory. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now