Muncher Posted December 9, 2020 Share Posted December 9, 2020 Has anyone got there rims powder coated before? If so how much did you spend to get it done. I like my kj renegade rims but there all chipped up and nasty looking. If its to much to get re done ill either go with factory rims or some steel wheels. Whats everyone think I should do? Link to comment Share on other sites More sharing options...
MiNi Beast Posted December 9, 2020 Share Posted December 9, 2020 powder coating isnt all that much. a set of 4 can be from 250 to 450 and thats typically sandblasted work as well. Link to comment Share on other sites More sharing options...
gogmorgo Posted December 9, 2020 Share Posted December 9, 2020 It’s worth looking into. Those KJ Icons look sharp, and the 16” opens up a lot of tire size options, especially if you’re looking for oversized winters. Link to comment Share on other sites More sharing options...
PCO6 Posted December 9, 2020 Share Posted December 9, 2020 I had a set of MOAB wheels powder coated for my XJ. I had several to choose from so I took in one of my worst and one of my best to get a price quote. The guy said it didn't matter, they could do a good job on any of them provided they weren't damaged (chipped or cracked rims, egg shaped stud holes, etc.). He was right and they turned out great. The price was $100 CDN ea. (about $75 US). The process was to dip them to remove the original coatings, heat them for off gassing, media blast them and then do the powder coating. I figured I couldn't buy new wheels for that price and of course there are some that you just can't get. I went with the original silver but there was a lot of options. Sorry that I don't have a "wheel only" pic but this is how they turned out ... Link to comment Share on other sites More sharing options...
89 MJ Posted December 9, 2020 Share Posted December 9, 2020 I don’t have any pictures, but I could grab some if you want. My parents got their 17” wheels on their Suburban blasted and powder coated for $260. Link to comment Share on other sites More sharing options...
Muncher Posted December 10, 2020 Author Share Posted December 10, 2020 15 hours ago, PCO6 said: I had a set of MOAB wheels powder coated for my XJ. I had several to choose from so I took in one of my worst and one of my best to get a price quote. The guy said it didn't matter, they could do a good job on any of them provided they weren't damaged (chipped or cracked rims, egg shaped stud holes, etc.). He was right and they turned out great. The price was $100 CDN ea. (about $75 US). The process was to dip them to remove the original coatings, heat them for off gassing, media blast them and then do the powder coating. I figured I couldn't buy new wheels for that price and of course there are some that you just can't get. I went with the original silver but there was a lot of options. Sorry that I don't have a "wheel only" pic but this is how they turned out ... think mine might be chipped sadly Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now