AZJeff Posted October 30, 2020 Share Posted October 30, 2020 The attached photo shows some pictures of a front bumper that used to be on my MJ that I am offering to a new home for free. It's a custom modified XJ/MJ bumper made by welding/fitting/grinding to create an all-steel bumper that runs the full-width of the vehicle. The entire bumper, both inside and out, is coated with truck bed liner, creating a scratch and rust-resistant surface. The bumper is attached using the standard OEM brackets (which are included). There are two lugs welded on the front of the bumper that are intended for tow clevis, but they are strictly cosmetic. They are NOT capable of any real towing. NOTE---the lights shown in the photos DO NOT come with the bumper, nor do the tow clevis that are in the photos. Here is why I say "mostly for free"--I will GIVE the bumper to it's future owner, but you have to pay SHIPPING COSTS. (I am in the Phoenix, AZ.) I have found that shipping costs using the regular carriers like Fedex or UPS are pretty expensive ($150+), but if the recipient knows of an independent freight company in his local area, it might be possible to have it shipped reasonably. If you want this bumper, talk to a local freight carrier and let me know. I have a shipping box, so the bumper is ready to be sent off. The boxed-up bumper is 72" x 19" x 10", and weighs about 55 lbs. This should help anyone who wants this bumper with figuring costs for shipping. I just don't want this relative nice bumper to go in the landfill. Link to comment Share on other sites More sharing options...
fiatslug87 Posted October 30, 2020 Share Posted October 30, 2020 That's a very generous offer right there. CC members are the BEST!! Link to comment Share on other sites More sharing options...
Torq_Shep Posted October 30, 2020 Share Posted October 30, 2020 Its a nice looking bumper for sure! Hopefully someone with the right rig for it picks it up! Link to comment Share on other sites More sharing options...
scguy Posted October 30, 2020 Share Posted October 30, 2020 Do you have to cut fenders to run this bumper? Link to comment Share on other sites More sharing options...
AZJeff Posted November 14, 2020 Author Share Posted November 14, 2020 On 10/30/2020 at 12:32 PM, scguy said: Do you have to cut fenders to run this bumper? Yes, the fenders must be cut like a 1997+ XJ. Link to comment Share on other sites More sharing options...
sinkrun Posted November 18, 2020 Share Posted November 18, 2020 if anyone wants this check out greyhound shipping much cheaper. Link to comment Share on other sites More sharing options...
Dzimm Posted November 18, 2020 Share Posted November 18, 2020 Is it reinforced on the backside? Is it using the factory bumper mounts or custom ones? It's tempting for sure, keep coming back to look at it. Link to comment Share on other sites More sharing options...
AZJeff Posted November 24, 2020 Author Share Posted November 24, 2020 On 11/17/2020 at 10:11 PM, Dzimm said: Is it reinforced on the backside? Is it using the factory bumper mounts or custom ones? It's tempting for sure, keep coming back to look at it. It uses the standard mounts. It is NOT reinforced on the back side, but adding such wouldn’t be tough for someone with fab. skills. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.